Response parameters are as follows.

Parameter description

**Table 1** Response parameter
Parameter	Type	Description
security_groups	Array of security_group objects	Specifies the security group objects. For details, see Table 2.

**Table 2** Description of **security_group** fields
Name	Mandatory	Type	Description
name	Yes	String	Specifies the security group name. The value can contain 1 to 64 characters, including letters, digits, underscores (_), hyphens (-), and periods (.).
vpc_id	No	String	Specifies the resource ID of the VPC to which the security group belongs. NOTE: This parameter has been discarded, it is not recommended to use it.
enterprise_project_id	No	String	Specifies the enterprise project ID. When creating a security group, associate the enterprise project ID with the security group. The value is 0 or a string that contains a maximum of 36 characters in UUID format with hyphens (-). Value 0 indicates the default enterprise project. NOTE: This parameter is unsupported. Do not use it.

**Table 3** **security_group_rules** objects
Parameter	Type	Description
id	String	Specifies the security group rule ID, which uniquely identifies the security group rule.
description	String	Provides supplementary information about the security group rule. The value is a string of no more than 255 characters that can contain letters and digits.
security_group_id	String	Specifies the security group rule ID, which uniquely identifies the security group rule.
direction	String	Specifies the direction of access control. The value can be egress or ingress.
ethertype	String	Specifies the IP protocol version. The value can be IPv4 or IPv6.
protocol	String	Specifies the protocol type. The value can be icmp, tcp, udp, or others. If the parameter is left blank, the security group supports all protocols.
port_range_min	int	Specifies the start port number. The value ranges from 1 to 65535. The value cannot be greater than the port_range_max value. An empty value indicates all ports. If the protocol is icmp, the value range is shown in ICMP-Port Range Relationship Table.
port_range_max	int	Specifies the end port number. The value ranges from 1 to 65535. If the protocol is not icmp, the value cannot be smaller than the port_range_min value. An empty value indicates all ports. If the protocol is icmp, the value range is shown in ICMP-Port Range Relationship Table.
remote_ip_prefix	String	Specifies the remote IP address. If the access control direction is set to egress, the parameter specifies the source IP address. If the access control direction is set to ingress, the parameter specifies the destination IP address. The value can be in the CIDR format or IP addresses. The parameter is exclusive with parameter remote_group_id.
remote_group_id	String	Specifies the ID of the peer security group. The value is exclusive with parameter remote_ip_prefix.

Example response

{
    "security_groups": [
        {
            "id": "16b6e77a-08fa-42c7-aa8b-106c048884e6", 
            "name": "qq", 
            "description": "qq", 
            "vpc_id": "3ec3b33f-ac1c-4630-ad1c-7dba1ed79d85", 
           
            "security_group_rules": [
                {
                    "direction": "egress", 
                    "ethertype": "IPv4", 
                    "id": "369e6499-b2cb-4126-972a-97e589692c62", 
                    "description": "",
                    "security_group_id": "16b6e77a-08fa-42c7-aa8b-106c048884e6"
                }, 
                {
                    "direction": "ingress", 
                    "ethertype": "IPv4", 
                    "id": "0222556c-6556-40ad-8aac-9fd5d3c06171", 
                    "description": "",
                    "remote_group_id": "16b6e77a-08fa-42c7-aa8b-106c048884e6", 
                    "security_group_id": "16b6e77a-08fa-42c7-aa8b-106c048884e6"
                }
            ]
        }, 
        {
            "id": "9c0f56be-a9ac-438c-8c57-fce62de19419", 
            "name": "default", 
            "description": "qq", 
            "vpc_id": "13551d6b-755d-4757-b956-536f674975c0", 
           
            "security_group_rules": [
                {
                    "direction": "egress", 
                    "ethertype": "IPv4", 
                    "id": "95479e0a-e312-4844-b53d-a5e4541b783f", 
                    "description": "",
                    "security_group_id": "9c0f56be-a9ac-438c-8c57-fce62de19419"
                }, 
                {
                    "direction": "ingress", 
                    "ethertype": "IPv4", 
                    "id": "0c4a2336-b036-4fa2-bc3c-1a291ed4c431",
                    "description": "", 
                    "remote_group_id": "9c0f56be-a9ac-438c-8c57-fce62de19419", 
                    "security_group_id": "9c0f56be-a9ac-438c-8c57-fce62de19419"
                }
            ]
        }
    ]
}

Response Parameters for Querying Security Groups