Dedicated load balancers with IPv6 addresses are not supported.
-HEADER: The request header will be used for matching.
QUERY_STRING: A query string will be used for matching.
SOURCE_IP: The source IP address will be used for matching.
+Note:
If type is set to HOST_NAME, PATH, METHOD, or SOURCE_IP, only one forwarding rule can be created for each type.
-invert
diff --git a/docs/elb/api-ref/CreateListener.html b/docs/elb/api-ref/CreateListener.html index f4a32f561..d34d1ac36 100644 --- a/docs/elb/api-ref/CreateListener.html +++ b/docs/elb/api-ref/CreateListener.html @@ -388,8 +388,32 @@If type is set to HOST_NAME for a forwarding rule, the value parameter of the forwarding rule supports wildcard asterisks (*).
The conditions parameter can be specified for forwarding rules.
Value false can't be used after this parameter was set to true.
-protection_status
+No
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+No
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
If type is set to HOST_NAME for a forwarding rule, the value parameter of the forwarding rule supports wildcard asterisks (*).
The conditions parameter can be specified for forwarding rules.
Value false can't be used after this parameter was set to true.
-Default: false
@@ -837,13 +860,33 @@Specifies the QUIC configuration for the current listener. This parameter is valid only when protocol is set to HTTPS.
For a TCP/UDP/HTTP/QUIC listener, if this parameter is not left blank, an error will be reported.
-The client sends a normal HTTP request that contains information indicating that the QUIC protocol is supported.
-If QUIC upgrade is enabled for the listeners, QUIC port and version information will be added to the response header.
When the client sends both HTTPS and QUIC requests to the server, if the QUIC request is successfully sent, QUIC protocol will be used for subsequent communications.
QUIC protocol is not supported.
protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+You cannot bind an existing and unoccupied private IPv4 address, IPv6 address, or public IPv6 address to the load balancer.
Load balancers are billed by fixed specifications or elastic specifications you have selected when you create the load balancer. For details, see the descriptions about parameters l4_flavor_id and l7_flavor_id.
Dedicated load balancers with IPv6 addresses are not supported.
- There are some constraints when you create a dedicated load balancer:
vpc_id, vip_subnet_cidr_id, and ipv6_vip_virsubnet_id cannot be left blank at the same time.
@@ -355,8 +354,7 @@true: Enable deletion protection.
false (default): Disable deletion protection.
Disable deletion protection for all your resources before deleting your account.
-waf_failure_action
@@ -397,6 +395,31 @@Maximum: 255
protection_status
+No
+String
+Specifies the protection status. This parameter is used to prevent resources from being modified by accident on the console. If this parameter is set to consoleProtection, you cannot modify resource settings on the console, but you can call APIs to modify resource settings, such as resource tags.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+No
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+false: Deletion protection is not enabled.
true: Deletion protection is enabled.
Disable deletion protection for all your resources before deleting your account.
-This parameter is returned only when deletion protection is enabled at the site.
@@ -994,6 +1016,27 @@ +protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+true: Enable removal protection.
false (default): Disable removal protection.
Disable removal protection for all your resources before deleting your account.
-vpc_id
@@ -263,6 +262,31 @@Maximum: 36
protection_status
+No
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+No
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+true: Enable removal protection.
false: Disable removal protection.
Disable removal protection for all your resources before deleting your account.
-created_at
@@ -560,6 +583,35 @@protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+az_affinity
+AzAffinity object
+Specifies how AZ affinity is configured for the backend server group.
+This parameter is unsupported. Please do not use it.
+Parameter + |
+Type + |
+Description + |
+
|---|---|---|
enable + |
+Boolean + |
+Specifies whether to enable AZ affinity for the backend server group. If this parameter is set to true, ELB forwards traffic across the backend servers in the same AZ as the load balancer. +Constraints: +
The value can be false (disabled) or true (enabled). + |
+
az_minimum_healthy_member_percentage + |
+Integer + |
+Specifies a percentage that is used to determine the health of an AZ. If the percentage of healthy servers in the AZ of the load balancer falls below the specified value, az_unhealthy_fallback_strategy is triggered. az_minimum_healthy_member_percentage shows the ratio of healthy servers to total servers in a backend server group of an AZ. The number of healthy servers is rounded up. For example, in AZ A, if there are three backend servers in the backend server group and az_minimum_healthy_member_percentage is set to 66%, the number of healthy servers is rounded up to 2 (3 × 0.66 = 1.98). If there are fewer than two healthy servers in AZ A, az_unhealthy_fallback_strategy is triggered. If az_minimum_healthy_member_percentage is set to 67%, the number of healthy servers is rounded up to 3 (3 × 0.67 = 2.01). If there are fewer than three healthy servers in AZ A, az_unhealthy_fallback_strategy is triggered. +Constraints: +
Value range: an integer ranging from -1 to 100. -1 indicates that az_minimum_healthy_member_count takes effect. + |
+
az_minimum_healthy_member_count + |
+Integer + |
+Specifies a number that is used to determine the health of an AZ. If the number of healthy servers in the AZ of the load balancer falls below the specified value, az_unhealthy_fallback_strategy is triggered. az_minimum_healthy_member_count shows the number of healthy servers to total servers in a backend server group of an AZ. +Constraints: +
Value range: an integer ranging from -1 to 10000. -1 indicates that az_minimum_healthy_member_percentage takes effect. + |
+
az_unhealthy_fallback_strategy + |
+String + |
+Specifies how traffic will be distributed across backend servers in an AZ if the percentage or number of healthy servers in the AZ of the load balancer falls below the specified value. +Value options: +
The value can be forward_to_all_member_of_local_az, forward_to_healthy_member_of_remote_az, forward_to_all_healthy_member, or forward_to_all_member. +Default value: forward_to_all_member_of_local_az + |
+
POST https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/pools
diff --git a/docs/elb/api-ref/DeleteCertificate.html b/docs/elb/api-ref/DeleteCertificate.html
index 23f53434a..d64ed363f 100644
--- a/docs/elb/api-ref/DeleteCertificate.html
+++ b/docs/elb/api-ref/DeleteCertificate.html
@@ -63,7 +63,9 @@
None
+Status code: 204
+Successful request.
+None
Deleting an SSL certificate
DELETE https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/certificates/233a325e5e3e4ce8beeb320aa714cc12
diff --git a/docs/elb/api-ref/DeleteHealthMonitor.html b/docs/elb/api-ref/DeleteHealthMonitor.html
index db5d8fd74..65c9cebec 100644
--- a/docs/elb/api-ref/DeleteHealthMonitor.html
+++ b/docs/elb/api-ref/DeleteHealthMonitor.html
@@ -63,7 +63,9 @@
None
+Status code: 204
+Successful request.
+None
DELETE https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/healthmonitors/c2b210b2-60c4-449d-91e2-9e9ea1dd7441
None
+Status code: 204
+Successful request.
+None
Deleting an IP address group
DELETE https://{ELB_Endpoint}/v3/45977fa2dbd7482098dd68d0d8970117/elb/ipgroups/8722e0e0-9cc9-4490-9660-8c9a5732fbb0
diff --git a/docs/elb/api-ref/DeleteL7Policy.html b/docs/elb/api-ref/DeleteL7Policy.html
index 05ad998ea..80ecf8e18 100644
--- a/docs/elb/api-ref/DeleteL7Policy.html
+++ b/docs/elb/api-ref/DeleteL7Policy.html
@@ -61,7 +61,9 @@
None
+Status code: 204
+Successful request.
+None
DELETE https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/l7policies/cf4360fd-8631-41ff-a6f5-b72c35da74be
None
+Status code: 204
+Successful request.
+None
DELETE https://{ELB_Endpoint}/v3/{99a3fff0d03c428eac3678da6a7d0f24}/elb/l7policies/cf4360fd-8631-41ff-a6f5-b72c35da74be/rules/84f4fcae-9c15-4e19-a99f-72c0b08fd3d7
None
+Status code: 204
+Successful request.
+None
DELETE https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/listeners/0b11747a-b139-492f-9692-2df0b1c87193
None
+Status code: 204
+Successful request.
+None
Deleting a load balancer
DELETE https://{ELB_Endpoint}/v3/060576782980d5762f9ec014dd2f1148/elb/loadbalancers/32c1057f-74a1-42d6-9b20-d55b80ab89c4
diff --git a/docs/elb/api-ref/DeleteLogtank.html b/docs/elb/api-ref/DeleteLogtank.html
index 4b952aaba..b9583bc42 100644
--- a/docs/elb/api-ref/DeleteLogtank.html
+++ b/docs/elb/api-ref/DeleteLogtank.html
@@ -61,7 +61,9 @@
None
+Status code: 204
+No Content
+None
Deleting a log
DELETE https://{ELB_Endpoint}/v3/060576798a80d5762fafc01a9b5eedc7/elb/logtanks/603e507f-3e18-498b-9460-01a3b6c28fc5
diff --git a/docs/elb/api-ref/DeleteMember.html b/docs/elb/api-ref/DeleteMember.html
index 228c5bd88..027bf5de2 100644
--- a/docs/elb/api-ref/DeleteMember.html
+++ b/docs/elb/api-ref/DeleteMember.html
@@ -74,7 +74,9 @@
None
+Status code: 204
+Successful request.
+None
DELETE https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/pools/36ce7086-a496-4666-9064-5ba0e6840c75/members/1923923e-fe8a-484f-bdbc-e11559b1f48f
None
+Status code: 204
+Successful request.
+None
DELETE https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/pools/36ce7086-a496-4666-9064-5ba0e6840c75
None
+Status code: 204
+Successful request.
+None
Deleting a custom security policy
DELETE https://{ELB_Endpoint}/v3/45977fa2dbd7482098dd68d0d8970117/elb/security-policies/8722e0e0-9cc9-4490-9660-8c9a5732fbb0
diff --git a/docs/elb/api-ref/ErrorCode.html b/docs/elb/api-ref/ErrorCode.html
index d000dd578..5ae05a068 100644
--- a/docs/elb/api-ref/ErrorCode.html
+++ b/docs/elb/api-ref/ErrorCode.html
@@ -18,7 +18,7 @@
ELB.0002
RequestBody is null or empty,request is invalid.
+The request body is null or empty. The request is invalid.
The request body is empty.
ELB.0004
Api response is null or invaild.
+The API response is null or invalid.
The response is empty.
ELB.1003
Lb not exist.
+The load balancer does not exist.
The load balancer does not exist.
ELB.1004
Query condition is not valid.
+The query condition is invalid.
Invalid query condition.
ELB.1005
Update request paramters error.
+Invalid update request parameters.
Failed to modify the load balancer.
ELB.1007
Query internal ELB error.
+Querying the internal load balancer failed.
Failed to query details of the private network load balancer.
+Failed to query the details of the private network load balancer.
Contact customer service.
ELB.1008
There is at least one member under the lb.
+This load balancer has members associated.
Failed to delete the load balancer.
ELB.1010
Query elb quota error.
+Querying the load balancer quota failed.
Failed to query the quota.
ELB.1011
Private_key or certificate content is not valid.
+Invalid private key or certificate content.
Invalid private or public key of the server certificate.
ELB.1012
Create tenant resource relation error.
+Failed to create the relationship between resources and the user.
Failed to create the relationship between resources and the user.
ELB.1013
Update resource tenant allocation failed, cloud eye warning rule exceeds.
+Quota modification failed. The quota set in the Cloud Eye alarm rule is excessively high.
Failed to modify the quota of a resource because the quota set in the Cloud Eye alarm rule is too large.
+The quota modification failed due to an excessively high quota setting in the Cloud Eye alarm rule.
Contact customer service.
ELB.1014
Query resouce tenant relation failed.
+Failed to query the relationship between resources and the user.
Failed to query the relationship between resources and the user.
ELB.1015
Lb can not be updated.
+Updating the load balancer failed.
Failed to modify the load balancer.
ELB.1018
There is at least one member under the lb.
+This load balancer has members associated.
Failed to delete the load balancer because it has backend servers associated.
ELB.1020
Lb ID is not correct.
+Incorrect load balancer ID.
Incorrect load balancer ID.
ELB.1021
Request parameters error, name invalid.
+Invalid request parameters. Invalid load balancer name.
Invalid load balancer name.
ELB.1025
Udpate request parameters error, name is too long.
+Invalid update request parameters. The load balancer name is too long.
The load balancer name exceeds the length limit.
ELB.1031
Request parameters error, lb len description too long.
+Invalid request parameters. The load balancer description is too long.
The load balancer description exceeds the length limit.
ELB.1035
Update request parameters error, name is not valid.
+Invalid update request parameters. Invalid load balancer name.
Invalid load balancer name.
ELB.1041
Request parameters error, lb type is not valid.
+Invalid request parameters. Invalid load balancer type.
Invalid load balancer type.
ELB.1045
Update request parameters error, description too long.
+Invalid update request parameters. The load balancer description is too long.
The load balancer description exceeds the length limit.
ELB.1051
Request parameters error, lb bandwidth is not valid.
+Invalid request parameters. Invalid load balancer bandwidth.
Invalid bandwidth configured for the load balancer.
ELB.1061
Request parameters error, lb vip_address and vip_subnet_id are nil.
+Invalid request parameters. Parameters vip_address and vip_subnet_id are null.
The EIP or subnet ID is left blank.
ELB.1071
Request parameters error, lb vip_address is not valid.
+Invalid request parameters. vip_address is not valid.
Invalid EIP.
ELB.1081
Request parameters error, lb vpc_id is empty.
+Invalid request parameters. vpc_id is empty.
The VPC ID is left blank.
ELB.1101
Vip address is exist.
+The EIP already exists.
The EIP already exists.
ELB.1110
version not found.
+The API version could not be found.
The API version does not exist.
ELB.1201
Get Token failed
+Obtaining the token failed.
Failed to obtain the token.
ELB.1202
enterprise_project_id can not be empty
+enterprise_project_id cannot be empty.
An error occurred during the verification of ep_id.
+Verification of the enterprise project ID failed.
Check the enterprise project ID.
ELB.1204
Bind fail.
+Binding failed.
Failed to associate the load balancer with the enterprise project.
ELB.2002
Delete member input param error.
+Invalid request parameters for removing the backend server.
Failed to remove the backend server because the parameters are invalid.
ELB.2003
Query member failed.
+Querying the member failed.
Failed to query the backend server.
ELB.2005
Update member failed.
+Updating the member failed.
Failed to update the backend server.
ELB.2010
Member listener ID length is not correct.
+Invalid listener ID length.
The listener ID exceeds the length limit.
ELB.2011
Add member listener is not exist.
+The listener does not exist.
The listener does not exist.
ELB.2012
This member is not exist.
+The member does not exist.
The backend server does not exist.
ELB.2020
Member listener ID content is not correct.
+Invalid listener ID.
Invalid listener ID.
ELB.2021
Request parameters error, member address is null.
+Invalid request parameters. The member IP address is null.
Invalid backend server IP address.
ELB.3001
Create floating IP failed.
+Creating the EIP failed.
Failed to assign the EIP.
ELB.3002
Delete floating IP failed.
+Deleting the EIP failed.
Failed to release the EIP.
ELB.3003
Query floating IP failed.
+Querying the EIP failed.
Failed to query the EIP.
ELB.3004
Query floating IP list failed.
+Querying EIPs failed.
Failed to query EIPs.
ELB.4001
Create elastic IP failed.
+Creating the EIP failed.
Failed to assign the EIP.
ELB.4002
Delete elastic IP failed.
+Deleting the EIP failed.
Failed to release the EIP.
ELB.4003
Query elastic IP failed.
+Querying the EIP failed.
Failed to query the EIP.
ELB.4004
Query elastic IP list failed.
+Querying EIPs failed.
Failed to query EIPs.
ELB.4005
Update elastic IP failed.
+Updating the EIP failed.
Failed to update the EIP.
ELB.5003
Query bandwidth failed.
+Querying the bandwidth failed.
Failed to query the bandwidth.
ELB.5005
Update bandwidth failed.
+Updating the bandwidth failed.
Failed to modify the bandwidth.
ELB.5013
Private_key or certificate content is not valid.
+Invalid private key or certificate content.
Invalid public or private key of the server certificate.
ELB.5020
The certificate ID must be 32 characters.
+The certificate ID must be 32 characters long.
The certificate ID is not a 32-character string.
ELB.5033
Failed to update certificate.
+Failed to update the certificate.
Failed to modify the certificate.
ELB.5141
Failed to query the user certificate quota.
+Failed to query the used certificate quota.
Failed to query the used certificate quota.
ELB.6010
Listener ID content is not correct.
+Invalid listener ID.
Invalid listener ID.
ELB.6011
Request parameters error, listener name too long.
+Invalid request parameters. The listener name is too long.
The listener name exceeds the length limit.
ELB.6015
This listener prerty cannot be updated
+The listener property cannot be updated.
The listener property cannot be modified.
ELB.6021
Request parameters error, listener name is not valid.
+Invalid request parameters. Invalid listener name.
Invalid listener name.
ELB.6025
Udpate request parameters error, listener len name too long.
+Invalid update request parameters. The listener name is too long.
The listener name exceeds the length limit.
ELB.6030
Listener is not associated with loadbalancer id.
+The listener has not been associated with any load balancer.
The listener does not belong to any load balancer.
ELB.6031
Request parameters error, listener len description too long.
+Invalid request parameters. The listener description is too long.
The listener description exceeds the length limit.
ELB.6035
Udpate request parameters error, listener name is not valid.
+Invalid update request parameters. Invalid listener name.
Invalid listener name.
ELB.6040
The loadbalaner that the listener belongs to is not exist.
+The load balancer that the listener is associated with does not exist.
The load balancer to which the listener is added does not exist.
+The load balancer that the listener is associated with does not exist.
Check the load balancer ID.
ELB.6041
Request parameters error, listener port is not in 1 ~ 65535.
+Invalid request parameters. The listener port must be within the range of 1 to 65535.
Invalid port number.
ELB.6045
Update request parameters error, listener len description too long.
+Invalid update request parameters. The listener description is too long.
The listener description exceeds the length limit.
ELB.6051
Request parameters error, listener lb algorithm is not valid.
+Invalid request parameters. Invalid load balancing algorithm.
Invalid load balancing algorithm.
ELB.6061
Request parameters error, listener protocol is not valid.
+Invalid request parameters. Invalid listener protocol.
Invalid listener protocol.
ELB.6071
Request parameters error, listener backend protocol is not valid.
+Invalid request parameters. Invalid backend protocol.
Invalid backend server protocol.
+Invalid backend protocol.
Change the protocol.
ELB.6200
Load Balaner *** already has a listener with protocol_port of ***.
+Load balancer *** already has a listener with protocol_port of ***.
The port number is in use.
ELB.7000
Listener_id must not be null.
+The listener ID must not be null.
The listener ID is left blank.
ELB.7001
Healthcheck_interval is illegal.
+Invalid health check interval.
Invalid query condition.
+Invalid update condition.
Change the query condition.
+Change the update condition.
400
ELB.7002
Healthcheck delete condition is not valid.
+Invalid health check deletion condition.
Invalid query condition.
+Invalid deletion condition.
Change the query condition.
+Change the deletion condition.
400
ELB.7004
Healthcheck query condition is not valid.
+Invalid health check query condition.
Invalid query condition.
ELB.7010
Healthcheck listener is not exist.
+The health check listener does not exist.
The listener with which the health check is associated does not exist.
ELB.7014
Healthcheck configuration not exist.
+The health check does not exist.
The health check does not exist.
ELB.7020
This healthcheck is not exist.
+The health check does not exist.
The health check does not exist.
ELB.8001
Create a SG error.
+Creating the security group failed.
Failed to create the security group.
ELB.8101
Create VPC error.
+Creating the VPC failed.
Failed to create the VPC.
ELB.8102
Delete VPC error.
+Deleting the VPC failed.
Failed to delete the VPC.
ELB.8103
Query VPC error.
+Querying the VPC failed.
Failed to query the VPC.
ELB.8201
Create subnet error.
+Creating the subnet failed.
Failed to create the subnet.
ELB.8202
Delete subnet error.
+Deleting the subnet failed.
Failed to delete the subnet.
ELB.8203
Query subnet error.
+Querying the subnet failed.
Failed to query the subnet.
ELB.8902
Invalid input for '%s' is not in %s.
+Invalid input for '%s'.
Invalid input parameters.
ELB.8909
Certificate with multi domain not supported by guaranteed listener.
+Certificates with multiple domains are not supported by dedicated load balancers.
Multiple domain certificate is not supported by dedicated loadbalancer.
+Certificates with multiple domains are not supported by dedicated load balancers.
Check input parameters.
The number of available IP addresses in the subnet on the downstream plane is insufficient.
The elb_virsubnet_ids %s is expected to use %s ipv4 addresses but only %s ipv4 addresses are available, Please reselect.
+The number of available IP addresses in the subnet on the downstream plane is insufficient.
Check your request based on the error message.
ELB.8938
The ip member just support when pool's protocol is %s.
+The IP member is supported only when the pool protocol is %s.
Invalid input parameters.
Change the value of pool_id in url to other suppprted pool or pass parameter 'subnet_cidr_id' when create member.
+Add members to supported pools or pass parameter subnet_cidr_id.
400
ELB.8939
The loadbalancer's ip_target_enable must be true when add ip member.
+The load balancer's ip_target_enable must be true when adding IP members.
Invalid input parameters.
Disable ip target of the loadbalancer or pass parameter 'subnet_cidr_id' when create member.
+Set ip_target_enable to false or pass parameter subnet_cidr_id.
400
ELB.8950
Cannot allocate resource for the loadbalancer.
+Resources cannot be allocated to the load balancer.
Cannot allocate resource for the loadbalancer.
+Resources cannot be allocated to the load balancer.
Contact customer service.
The %s flavor field does not support update from %s to %s.
Invalid input parameters when updating flavor.
+Invalid input parameters when updating the flavor.
Check input parameters.
ELB.9001
Interval ELB create VM error.
+Creating the VM failed.
Failed to create the VM.
ELB.9002
Internal ELB delete VM error.
+Deleting the VM failed.
Failed to delete the VM.
ELB.9003
Internal ELB query VM error.
+Querying the VM failed.
Failed to query details of the VM.
ELB.9006
Internal ELB update port fail.
+Updating the VM port failed.
Failed to update the port bound to the VM.
ELB.9007
Intenal ELB bind port fail.
+Binding the VM port failed.
Failed to bind the port to the VM.
ELB.9023
Internal ELB get image error.
+Querying the image failed.
Failed to query the image.
ELB.9033
Internal ELB get flavour error.
+Querying the VM flavor failed.
Failed to query the VM specifications.
ELB.9043
Internal ELB get interface error.
+Querying the VM port failed.
Failed to query the port bound to the VM.
ELB.9061
Internal ELB query topic fail.
+Querying the SMN topic failed.
Failed to query the SMN topic.
ELB.9062
Internal ELB create topic fail.
+Creating the SMN topic failed.
Failed to create the SMN topic.
ELB.9063
Internal ELB query subscription fail.
+Querying the SMN subscription failed.
Failed to query the SMN subscription.
ELB.9064
Internal ELB create subscription fail.
+Creating the SMN subscription failed.
Failed to create the SMN subscription.
ELB.9800
Resource could not be found.
+The resource could not be found.
The specified load balancer does not exist when ep_id is queried.
ELB.9801
Not be list action, enterprise_project_id must not be null.
+enterprise_project_id must not be null.
In fine-grained authorization, the enterprise ID is not passed in the request for querying load balancers.
ELB.9805
RequestBody listener[protocol] is null, this is a required parameter.
+Listener protocol in the request body is null. This is a required parameter.
ep_id in the URI is not a valid UUID.
Quota exceeded for resources: %s
No enought quota for resource.
+Not enough resource quotas.
Contact customer to expand quota.
+Contact customer to expand quotas.
400
@@ -1285,7 +1285,7 @@Invalid parameter. For details about the error, see the returned information.
Invalid parameter. For details about the error, see the returned information.
+Invalid parameter. For details about the error, see the returned information.
Please check parameters.
ELB.1091
Lb number larger than quota.
+The number of load balancers exceeds the quota.
The number of load balancers exceeds the quota.
ELB.1102
Token is error, Authentication required.
+Invalid token. Authentication required.
The token is empty.
Enter a token that has not expired.
+Enter a valid token that has not expired.
403
ELB.2001
Create member failed, the total amount of members exceeds the system setting.
+Creating the member failed. The total number of members exceeds the upper limit.
Failed to add the backend server because the number of backend servers reaches the limit.
ELB.6091
Request lb has more than user listener quota.
+The number of listeners reaches the limit.
The number of listeners reaches the limit.
ELB.8962
tenant %s does not support %s.
+The feature is not supported.
The feature is not supported.
ELB.9802
Policy doesn't allow elb:logtanks:create to be performed.
+elb:logtanks:create is not obtained.
Authentication failed.
ELB.9803
Policy doesn't allow elb:loadbalancers:list to be performed.
+elb:loadbalancers:list is not obtained.
Authentication failed.
ELB.9804
Policy doesn't allow elb:loadbalancers:list to be performed.
+elb:loadbalancers:list is not obtained.
Authentication failed.
ELB.1002
Find lb failed.
+The load balancer is not found.
The load balancer does not exist.
%s %s could not be found.
Resource could not be found.
+The resource could not be found.
Please check the parameters.
Quota exceeded for resources: %s
No enough quota for resource.
+Not enough resource quotas.
Contact customer to expand quota.
+Contact customer service.
409
@@ -1470,7 +1470,7 @@ELB.8906
Internal error. For details about the error, see the returned information.
+Internal server error.
Internal error. For details about the error, see the returned information.
Multiple IDs can be queried in the format of member_instance_id=xxx&member_instance_id=xxx.
protection_status
+No
+Array of strings
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+If type is set to HOST_NAME for a forwarding rule, the value parameter of the forwarding rule supports wildcard asterisks (*).
The conditions parameter can be specified for forwarding rules.
Value false can't be used after this parameter was set to true.
-Default: false
@@ -704,13 +716,33 @@Specifies the QUIC configuration for the current listener. This parameter is valid only when protocol is set to HTTPS.
For a TCP/UDP/HTTP/QUIC listener, if this parameter is not left blank, an error will be reported.
-The client sends a normal HTTP request that contains information indicating that the QUIC protocol is supported.
-If QUIC upgrade is enabled for the listeners, QUIC port and version information will be added to the response header.
When the client sends both HTTPS and QUIC requests to the server, if the QUIC request is successfully sent, QUIC protocol will be used for subsequent communications.
QUIC protocol is not supported.
protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+"dualstack" is not supported.
+protection_status
+No
+Array of strings
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+false: Deletion protection is not enabled.
true: Deletion protection is enabled.
Disable deletion protection for all your resources before deleting your account.
-This parameter is returned only when deletion protection is enabled at the site.
@@ -796,6 +808,27 @@ +protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+Specifies the type of the backend server. Values:
ip: IP as Backend servers
instance: ECSs used as backend servers
-Multiple values can be queried in the format of member_type=xxx&member_type=xxx.
Multiple values can be queried in the format of member_type=xxx&member_type=xxx.
instance_id
diff --git a/docs/elb/api-ref/ListPools.html b/docs/elb/api-ref/ListPools.html index c6ad88c41..e704ec842 100644 --- a/docs/elb/api-ref/ListPools.html +++ b/docs/elb/api-ref/ListPools.html @@ -271,6 +271,19 @@protection_status
+No
+Array of strings
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+true: Enable removal protection.
false: Disable removal protection.
Disable removal protection for all your resources before deleting your account.
-created_at
@@ -540,6 +552,35 @@protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+az_affinity
+AzAffinity object
+Specifies how AZ affinity is configured for the backend server group.
+This parameter is unsupported. Please do not use it.
+Parameter + |
+Type + |
+Description + |
+
|---|---|---|
enable + |
+Boolean + |
+Specifies whether to enable AZ affinity for the backend server group. If this parameter is set to true, ELB forwards traffic across the backend servers in the same AZ as the load balancer. +Constraints: +
The value can be false (disabled) or true (enabled). + |
+
az_minimum_healthy_member_percentage + |
+Integer + |
+Specifies a percentage that is used to determine the health of an AZ. If the percentage of healthy servers in the AZ of the load balancer falls below the specified value, az_unhealthy_fallback_strategy is triggered. az_minimum_healthy_member_percentage shows the ratio of healthy servers to total servers in a backend server group of an AZ. The number of healthy servers is rounded up. For example, in AZ A, if there are three backend servers in the backend server group and az_minimum_healthy_member_percentage is set to 66%, the number of healthy servers is rounded up to 2 (3 × 0.66 = 1.98). If there are fewer than two healthy servers in AZ A, az_unhealthy_fallback_strategy is triggered. If az_minimum_healthy_member_percentage is set to 67%, the number of healthy servers is rounded up to 3 (3 × 0.67 = 2.01). If there are fewer than three healthy servers in AZ A, az_unhealthy_fallback_strategy is triggered. +Constraints: +
Value range: an integer ranging from -1 to 100. -1 indicates that az_minimum_healthy_member_count takes effect. + |
+
az_minimum_healthy_member_count + |
+Integer + |
+Specifies a number that is used to determine the health of an AZ. If the number of healthy servers in the AZ of the load balancer falls below the specified value, az_unhealthy_fallback_strategy is triggered. az_minimum_healthy_member_count shows the number of healthy servers to total servers in a backend server group of an AZ. +Constraints: +
Value range: an integer ranging from -1 to 10000. -1 indicates that az_minimum_healthy_member_percentage takes effect. + |
+
az_unhealthy_fallback_strategy + |
+String + |
+Specifies how traffic will be distributed across backend servers in an AZ if the percentage or number of healthy servers in the AZ of the load balancer falls below the specified value. +Value options: +
The value can be forward_to_all_member_of_local_az, forward_to_healthy_member_of_remote_az, forward_to_all_healthy_member, or forward_to_all_member. +Default value: forward_to_all_member_of_local_az + |
+
GET https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/pools?limit=2
If type is set to HOST_NAME for a forwarding rule, the value parameter of the forwarding rule supports wildcard asterisks (*).
The conditions parameter can be specified for forwarding rules.
Value false can't be used after this parameter was set to true.
-Default: false
@@ -360,13 +359,33 @@Specifies the QUIC configuration for the current listener. This parameter is valid only when protocol is set to HTTPS.
For a TCP/UDP/HTTP/QUIC listener, if this parameter is not left blank, an error will be reported.
-The client sends a normal HTTP request that contains information indicating that the QUIC protocol is supported.
-If QUIC upgrade is enabled for the listeners, QUIC port and version information will be added to the response header.
When the client sends both HTTPS and QUIC requests to the server, if the QUIC request is successfully sent, QUIC protocol will be used for subsequent communications.
QUIC protocol is not supported.
protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+false: Deletion protection is not enabled.
true: Deletion protection is enabled.
Disable deletion protection for all your resources before deleting your account.
-This parameter is returned only when deletion protection is enabled at the site.
@@ -421,6 +420,27 @@ +protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+ONLINE (default): The listener is running normally.
DEGRADED: This status is displayed only when provisioning_status of a forwarding policy or a forwarding rule added to the listener is set to ERROR or operating_status is set to OFFLINE for a backend server associated with the listener.
DISABLED: This status is displayed only when admin_state_up of the load balancer or of the listener is set to false.
-Note: DEGRADED and DISABLED are returned only when the API for querying the load balancer status tree is called.
Note: DEGRADED and DISABLED are returned only when the API for querying the load balancer status tree is called.
diff --git a/docs/elb/api-ref/ShowPool.html b/docs/elb/api-ref/ShowPool.html index c3e8d8911..0d7ef200c 100644 --- a/docs/elb/api-ref/ShowPool.html +++ b/docs/elb/api-ref/ShowPool.html @@ -223,8 +223,7 @@true: Enable removal protection.
false: Disable removal protection.
Disable removal protection for all your resources before deleting your account.
-created_at
@@ -262,6 +261,35 @@protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+az_affinity
+AzAffinity object
+Specifies how AZ affinity is configured for the backend server group.
+This parameter is unsupported. Please do not use it.
+Parameter + |
+Type + |
+Description + |
+
|---|---|---|
enable + |
+Boolean + |
+Specifies whether to enable AZ affinity for the backend server group. If this parameter is set to true, ELB forwards traffic across the backend servers in the same AZ as the load balancer. +Constraints: +
The value can be false (disabled) or true (enabled). + |
+
az_minimum_healthy_member_percentage + |
+Integer + |
+Specifies a percentage that is used to determine the health of an AZ. If the percentage of healthy servers in the AZ of the load balancer falls below the specified value, az_unhealthy_fallback_strategy is triggered. az_minimum_healthy_member_percentage shows the ratio of healthy servers to total servers in a backend server group of an AZ. The number of healthy servers is rounded up. For example, in AZ A, if there are three backend servers in the backend server group and az_minimum_healthy_member_percentage is set to 66%, the number of healthy servers is rounded up to 2 (3 × 0.66 = 1.98). If there are fewer than two healthy servers in AZ A, az_unhealthy_fallback_strategy is triggered. If az_minimum_healthy_member_percentage is set to 67%, the number of healthy servers is rounded up to 3 (3 × 0.67 = 2.01). If there are fewer than three healthy servers in AZ A, az_unhealthy_fallback_strategy is triggered. +Constraints: +
Value range: an integer ranging from -1 to 100. -1 indicates that az_minimum_healthy_member_count takes effect. + |
+
az_minimum_healthy_member_count + |
+Integer + |
+Specifies a number that is used to determine the health of an AZ. If the number of healthy servers in the AZ of the load balancer falls below the specified value, az_unhealthy_fallback_strategy is triggered. az_minimum_healthy_member_count shows the number of healthy servers to total servers in a backend server group of an AZ. +Constraints: +
Value range: an integer ranging from -1 to 10000. -1 indicates that az_minimum_healthy_member_percentage takes effect. + |
+
az_unhealthy_fallback_strategy + |
+String + |
+Specifies how traffic will be distributed across backend servers in an AZ if the percentage or number of healthy servers in the AZ of the load balancer falls below the specified value. +Value options: +
The value can be forward_to_all_member_of_local_az, forward_to_healthy_member_of_remote_az, forward_to_all_healthy_member, or forward_to_all_member. +Default value: forward_to_all_member_of_local_az + |
+
GET https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/pools/36ce7086-a496-4666-9064-5ba0e6840c75
If the value is greater than or equal to 0, it indicates the current quota.
-1 indicates that the quota is not limited.
The maximum number of listeners that can be added to each load balancer is not limited, but it is recommended the listeners not exceed the default quota.
-free_instance_members_per_pool
diff --git a/docs/elb/api-ref/UpdateHealthMonitor.html b/docs/elb/api-ref/UpdateHealthMonitor.html index a2f6a2102..82c26557a 100644 --- a/docs/elb/api-ref/UpdateHealthMonitor.html +++ b/docs/elb/api-ref/UpdateHealthMonitor.html @@ -516,41 +516,6 @@Successful request.
400
-Invalid request body or request parameters.
-403
-Failed to verify the token.
-404
-The queried resource does not exist.
-409
-A conflict occurred.
-431
-The request headers are too large.
-494
-The request header or cookie is too large.
-500
-A service error occurred.
-Note:
If action is set to REDIRECT_TO_POOL, specify either redirect_pool_id or redirect_pools_config. If both are specified, only redirect_pools_config takes effect.
This parameter cannot be specified when action is set to REDIRECT_TO_LISTENER.
-All configuration will be overwritten.
All configuration will be overwritten.
@@ -453,9 +453,9 @@HEADER: The request header will be used for matching.
QUERY_STRING: A query string will be used for matching.
SOURCE_IP: The source IP address will be used for matching.
+Note:
If type is set to HOST_NAME, PATH, METHOD, or SOURCE_IP, only one forwarding rule can be created for each type.
-invert
diff --git a/docs/elb/api-ref/UpdateListener.html b/docs/elb/api-ref/UpdateListener.html index be0d8bc37..6c8a351ef 100644 --- a/docs/elb/api-ref/UpdateListener.html +++ b/docs/elb/api-ref/UpdateListener.html @@ -323,8 +323,32 @@If type is set to HOST_NAME for a forwarding rule, the value parameter of the forwarding rule supports wildcard asterisks (*).
The conditions parameter can be specified for forwarding rules.
Value false can't be used after this parameter was set to true.
-protection_status
+No
+String
+Specifies the protection status.
+Value options:
+nonProtection: The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+No
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. If protection_status is set to nonProtection, the value of protection_reason is removed. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
If type is set to HOST_NAME for a forwarding rule, the value parameter of the forwarding rule supports wildcard asterisks (*).
The conditions parameter can be specified for forwarding rules.
Value false can't be used after this parameter was set to true.
-Default: false
@@ -736,13 +759,33 @@Specifies the QUIC configuration for the current listener. This parameter is valid only when protocol is set to HTTPS.
For a TCP/UDP/HTTP/QUIC listener, if this parameter is not left blank, an error will be reported.
-The client sends a normal HTTP request that contains information indicating that the QUIC protocol is supported.
-If QUIC upgrade is enabled for the listeners, QUIC port and version information will be added to the response header.
When the client sends both HTTPS and QUIC requests to the server, if the QUIC request is successfully sent, QUIC protocol will be used for subsequent communications.
QUIC protocol is not supported.
protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+Specifies the ID of the IPv4 subnet where the load balancer resides. You can query parameter neutron_subnet_id in the response by calling the API (GET https://{VPC_Endpoint}/v1/{project_id}/subnets).
The IPv4 subnet can be updated using vip_subnet_cidr_id, and the private IPv4 address of the load balancer will be changed accordingly.
-Note:
If vip_address is also specified, the IP address specified by vip_address must be in the subnet specified by vip_subnet_cidr_id and will be used as the private IPv4 address of the load balancer.
The IPv4 subnet must be in the VPC where the load balancer resides.
This parameter can be updated only when guaranteed is set to true.
The value will become null if the private IPv4 address is unbound from the load balancer.
The IPv6 subnet will not change, if IPv4 subnet is updated.
Note:
Minimum: 1
Maximum: 36
true: Enable deletion protection.
false: Disable deletion protection.
Disable deletion protection for all your resources before deleting your account.
-waf_failure_action
@@ -285,6 +284,31 @@Maximum: 36
protection_status
+No
+String
+Specifies the protection status.
+Value options:
+nonProtection: The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+No
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. If protection_status is set to nonProtection, the value of protection_reason is removed. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+false: Deletion protection is not enabled.
true: Deletion protection is enabled.
Disable deletion protection for all your resources before deleting your account.
-This parameter is returned only when deletion protection is enabled at the site.
@@ -674,6 +697,27 @@ +protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+true: Enable removal protection.
false: Disable removal protection.
Disable removal protection for all your resources before deleting your account.
-vpc_id
@@ -208,6 +207,18 @@This parameter can be updated only when type is left blank.
protection_reason
+No
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. If protection_status is set to nonProtection, the value of protection_reason is removed. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+true: Enable removal protection.
false: Disable removal protection.
Disable removal protection for all your resources before deleting your account.
-created_at
@@ -502,6 +512,35 @@protection_status
+String
+Specifies the protection status.
+Value options:
+nonProtection (default): The load balancer is not protected.
+consoleProtection: Modification Protection is enabled on the console.
+protection_reason
+String
+Specifies why the modification protection is enabled.
+Note: This parameter is valid only when protection_status is set to consoleProtection. The value can contain a maximum of 255 Unicode characters, excluding angle brackets (<>).
+Minimum: 0
+Maximum: 255
+az_affinity
+AzAffinity object
+Specifies how AZ affinity is configured for the backend server group.
+This parameter is unsupported. Please do not use it.
+Parameter + |
+Type + |
+Description + |
+
|---|---|---|
enable + |
+Boolean + |
+Specifies whether to enable AZ affinity for the backend server group. If this parameter is set to true, ELB forwards traffic across the backend servers in the same AZ as the load balancer. +Constraints: +
The value can be false (disabled) or true (enabled). + |
+
az_minimum_healthy_member_percentage + |
+Integer + |
+Specifies a percentage that is used to determine the health of an AZ. If the percentage of healthy servers in the AZ of the load balancer falls below the specified value, az_unhealthy_fallback_strategy is triggered. az_minimum_healthy_member_percentage shows the ratio of healthy servers to total servers in a backend server group of an AZ. The number of healthy servers is rounded up. For example, in AZ A, if there are three backend servers in the backend server group and az_minimum_healthy_member_percentage is set to 66%, the number of healthy servers is rounded up to 2 (3 × 0.66 = 1.98). If there are fewer than two healthy servers in AZ A, az_unhealthy_fallback_strategy is triggered. If az_minimum_healthy_member_percentage is set to 67%, the number of healthy servers is rounded up to 3 (3 × 0.67 = 2.01). If there are fewer than three healthy servers in AZ A, az_unhealthy_fallback_strategy is triggered. +Constraints: +
Value range: an integer ranging from -1 to 100. -1 indicates that az_minimum_healthy_member_count takes effect. + |
+
az_minimum_healthy_member_count + |
+Integer + |
+Specifies a number that is used to determine the health of an AZ. If the number of healthy servers in the AZ of the load balancer falls below the specified value, az_unhealthy_fallback_strategy is triggered. az_minimum_healthy_member_count shows the number of healthy servers to total servers in a backend server group of an AZ. +Constraints: +
Value range: an integer ranging from -1 to 10000. -1 indicates that az_minimum_healthy_member_percentage takes effect. + |
+
az_unhealthy_fallback_strategy + |
+String + |
+Specifies how traffic will be distributed across backend servers in an AZ if the percentage or number of healthy servers in the AZ of the load balancer falls below the specified value. +Value options: +
The value can be forward_to_all_member_of_local_az, forward_to_healthy_member_of_remote_az, forward_to_all_healthy_member, or forward_to_all_member. +Default value: forward_to_all_member_of_local_az + |
+
PUT https://{ELB_Endpoint}/v3/99a3fff0d03c428eac3678da6a7d0f24/elb/pools/36ce7086-a496-4666-9064-5ba0e6840c75
diff --git a/docs/elb/api-ref/elb_fl_0005.html b/docs/elb/api-ref/elb_fl_0005.html
index 9bd092410..cf4d9954b 100644
--- a/docs/elb/api-ref/elb_fl_0005.html
+++ b/docs/elb/api-ref/elb_fl_0005.html
@@ -1,7 +1,9 @@
Sequencing Query Results
-API v2.0 enables the system to sort queried results based on customized keys by adding the sort_key and sort_dir parameters to the URL of the list request. sort_key specifies the parameter used for sequencing results, and sort_dir specifies whether results are displayed in ascending or descending order. These APIs allow sorting query results by multiple criteria. The number of sort_key parameters must be equal to that of sort_dir parameters. Otherwise, 400 status code is returned.
+API v2.0 enables the system to sort queried results based on customized keys by adding the sort_key and sort_dir parameters to the URL of the list request.
+sort_key specifies the parameter used for sequencing results, and sort_dir specifies whether results are displayed in ascending or descending order.
+These APIs allow sorting query results by multiple criteria. The number of sort_key parameters must be equal to that of sort_dir parameters. Otherwise, 400 status code is returned.
Example Request
GET /v2.0/networks?sort_key=name&sort_dir=asc&sort_key=status&sort_dir=desc
Example Response
{
diff --git a/docs/elb/api-ref/elb_zq_bm_0001.html b/docs/elb/api-ref/elb_zq_bm_0001.html
index 0330faa05..a28dc78d3 100644
--- a/docs/elb/api-ref/elb_zq_bm_0001.html
+++ b/docs/elb/api-ref/elb_zq_bm_0001.html
@@ -6,23 +6,23 @@
URI
POST /v2.0/lbaas/whitelists
Request
-Table 1 Parameter description Parameter
+Table 1 Parameter description Parameter
Mandatory
+Mandatory
Type
+Type
Description
+Description
whitelist
+whitelist
Yes
+Yes
Object
+Object
Specifies the whitelist. For details, see Table 2.
+Specifies the whitelist. For details, see Table 2.
Response
-Table 3 Response parameters Parameter
+Table 3 Response parameters Parameter
Type
+Type
Description
+Description
whitelist
+whitelist
Object
+Object
Specifies the whitelist. For details, see Table 4.
+Specifies the whitelist. For details, see Table 4.
-Table 4 whitelist parameter description Parameter
+Table 4 whitelist parameter description Parameter
Type
+Type
Description
+Description
id
+id
String
+String
Specifies the whitelist ID.
+Specifies the whitelist ID.
tenant_id
+tenant_id
String
+String
Specifies the ID of the project where the whitelist is used.
+Specifies the ID of the project where the whitelist is used.
The value contains a maximum of 255 characters.
listener_id
+listener_id
String
+String
Specifies the ID of the listener to which the whitelist is added.
+Specifies the ID of the listener to which the whitelist is added.
enable_whitelist
+enable_whitelist
Boolean
+Boolean
Specifies whether to enable access control.
+Specifies whether to enable access control.
true: Access control is enabled.
false: Access control is disabled.
whitelist
+whitelist
String
+String
Specifies the IP addresses in the whitelist.
+Specifies the IP addresses in the whitelist.
Response
-Table 2 Response parameters Parameter
+Table 2 Response parameters Parameter
Type
+Type
Description
+Description
whitelists
+whitelists
Array
+Array
Lists the whitelists. For details, see Table 3.
+Lists the whitelists. For details, see Table 3.
whitelists_links
+whitelists_links
Array
+Array
Provides links to the previous or next page during pagination query, respectively.
+Provides links to the previous or next page during pagination query, respectively.
This parameter exists only in the response body of pagination query.
For details, see Table 4.
-Table 3 whitelist parameter description Parameter
+Table 3 whitelist parameter description Parameter
Type
+Type
Description
+Description
id
+id
String
+String
Specifies the whitelist ID.
+Specifies the whitelist ID.
tenant_id
+tenant_id
String
+String
Specifies the ID of the project where the whitelist is used.
+Specifies the ID of the project where the whitelist is used.
The value contains a maximum of 255 characters.
listener_id
+listener_id
String
+String
Specifies the ID of the listener to which the whitelist is added.
+Specifies the ID of the listener to which the whitelist is added.
enable_whitelist
+enable_whitelist
Bool
+Bool
Specifies whether to enable access control.
+Specifies whether to enable access control.
true: Access control is enabled.
false: Access control is disabled.
whitelist
+whitelist
String
+String
Specifies the IP addresses in the whitelist.
+Specifies the IP addresses in the whitelist.
-Table 4 whitelists_links parameter description Parameter
+Table 4 whitelists_links parameter description Parameter
Type
+Type
Description
+Description
href
+href
String
+String
Provides links to the previous or next page during pagination query, respectively.
+Provides links to the previous or next page during pagination query, respectively.
rel
+rel
String
+String
Specifies the prompt of the previous or next page.
+Specifies the prompt of the previous or next page.
The value can be next or previous. The value next indicates the href containing the URL of the next page, and previous indicates the href containing the URL of the previous page.
URI
GET /v2.0/lbaas/whitelists/{whitelist_id}
-Table 1 Parameter description Parameter
+Table 1 Parameter description Parameter
Mandatory
+Mandatory
Type
+Type
Description
+Description
whitelist_id
+whitelist_id
Yes
+Yes
String
+String
Specifies the whitelist ID.
+Specifies the whitelist ID.
Request
None
Response
-Table 2 Response parameters Parameter
+Table 2 Response parameters Parameter
Type
+Type
Description
+Description
whitelist
+whitelist
Object
+Object
Specifies the whitelist. For details, see Table 3.
+Specifies the whitelist. For details, see Table 3.
-Table 3 whitelist parameter description Parameter
+Table 3 whitelist parameter description Parameter
Type
+Type
Description
+Description
id
+id
String
+String
Specifies the whitelist ID.
+Specifies the whitelist ID.
tenant_id
+tenant_id
String
+String
Specifies the ID of the project where the forwarding rule is used.
+Specifies the ID of the project where the forwarding rule is used.
The value contains a maximum of 255 characters.
listener_id
+listener_id
String
+String
Specifies the ID of the listener to which the whitelist is added.
+Specifies the ID of the listener to which the whitelist is added.
enable_whitelist
+enable_whitelist
Boolean
+Boolean
Specifies whether to enable access control.
+Specifies whether to enable access control.
true: Access control is enabled.
false: Access control is disabled.
whitelist
+whitelist
String
+String
Specifies the IP addresses in the whitelist.
+Specifies the IP addresses in the whitelist.
URI
PUT /v2.0/lbaas/whitelists/{whitelist_id}
-Table 1 Parameter description Parameter
+Table 1 Parameter description Parameter
Mandatory
+Mandatory
Type
+Type
Description
+Description
whitelist_id
+whitelist_id
Yes
+Yes
String
+String
Specifies the whitelist ID.
+Specifies the whitelist ID.
Request
-Table 2 Parameter description Parameter
+Table 2 Parameter description Parameter
Mandatory
+Mandatory
Type
+Type
Description
+Description
whitelist
+whitelist
Yes
+Yes
Object
+Object
Specifies the whitelist. For details, see Table 3.
+Specifies the whitelist. For details, see Table 3.
-