400
+ |
+NAT.0001
+ |
+Invalid value for created_at %(timestamp)s.
+ |
+Invalid timestamp.
+ |
+Make sure that you enter the time in the correct format.
+ |
+
+400
+ |
+NAT.0002
+ |
+Invalid parameters.
+ |
+Invalid request parameter.
+ |
+Check whether the input parameter is correct.
+ |
+
+400
+ |
+NAT.0006
+ |
+Rule has not been deleted.
+ |
+NAT gateway deletion failed because its rule has not been deleted.
+ |
+Check whether there are SNAT or DNAT rules using this NAT gateway.
+ |
+
+400
+ |
+NAT.0007
+ |
+DB Error
+ |
+The database is abnormal.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.0008
+ |
+Router %(router)s has no port for subnet %(subnet)s.
+ |
+The subnet is not connected to the virtual router.
+ |
+Add the subnet to the router port.
+ |
+
+400
+ |
+NAT.0009
+ |
+Resource %(res_type)s %(res)s is used by %(user_type)s %(user)s
+ |
+The resource is in use.
+ |
+Check whether the resource is in use.
+ |
+
+400
+ |
+NAT.0010
+ |
+Network %(network)s does not contain any IPv4 subnet
+ |
+No subnets added in this VPC.
+ |
+Check whether a subnet is added in this VPC. If no, add one.
+ |
+
+400
+ |
+NAT.0012
+ |
+The network %(network)s already has nat gateway.
+ |
+A NAT gateway has been created for this subnet.
+ |
+Select a subnet for which no NAT gateway has been created.
+ |
+
+400
+ |
+NAT.0014
+ |
+Invalid input for description.+exceeds maximum length of 255.
+ |
+description contains more than 255 characters.
+ |
+Enter a maximum of 255 characters.
+ |
+
+400
+ |
+NAT.0015
+ |
+Invalid input for name.+exceeds maximum length of 255.
+ |
+name contains more than 255 characters.
+ |
+Enter a maximum of 255 characters.
+ |
+
+400
+ |
+NAT.0016
+ |
+Invalid input for spec. Reason: '*' is not in ['1', '2', '3', '4'].
+ |
+The value of spec is not 1, 2, 3, or 4.
+ |
+Set spec to 1, 2, 3, or 4.
+ |
+
+400
+ |
+NAT.0017
+ |
+Invalid input for router_id. Reason: '********-****-****-****-*************' is not a valid UUID.
+ |
+router_id is an invalid UUID.
+ |
+Enter a valid router_id.
+ |
+
+400
+ |
+NAT.0018
+ |
+Invalid input for internal_network_id. Reason: '********-****-****-****-*************' is not a valid UUID.
+ |
+internal_network_id is an invalid UUID.
+ |
+Enter a valid internal_network_id.
+ |
+
+400
+ |
+NAT.0022
+ |
+Either network_id or cidr must be specified. Both can not be specified at the same time
+ |
+The subnet for which the SNAT rule is configured conflicts with the VPC subnet.
+ |
+Specify either network_id or cidr.
+ |
+
+400
+ |
+NAT.0026
+ |
+Floating IP ********-****-****-****-************* could not be found.
+ |
+The ID of the floating IP address is not found.
+ |
+Check whether the floating IP address ID is correct.
+ |
+
+400
+ |
+NAT.0101
+ |
+Lack of user authority.
+//request is null.
+//endpoint is empty.
+//resource type is invalid.
+//create natgateway requset is null.
+//update natgateway request is null
+//NatGateway id is invalid.
+//the enterprise project id is unsupported.
+//the enterprise project id in request is invalid.
+//request parameter is null.
+//tags is invalid.
+//get natgateways error limit is invalid.
+//get natgateways error marker is invalid.
+//Only admin user can do this action.
+//Parameters are invalid, check them and try.
+ |
+NAT gateway request error.
+ |
+Troubleshoot the fault as prompted or contact technical support.
+ |
+
+400
+ |
+NAT.0102
+ |
+The system is busy. Please try again later.
+ |
+The system is busy. Please try again later.
+ |
+Try again later.
+ |
+
+400
+ |
+NAT.0103
+ |
+NatGateway %(nat_gateway_id)s is not ACTIVE.
+ |
+The NAT gateway is not activated.
+ |
+If the NAT gateway is not in the running state for a long time, contact technical support.
+ |
+
+400
+ |
+NAT.0104
+ |
+NatGateway %(nat_gateway_id)s is not UP.
+//NatGateway %(nat_gateway_id)s is frozen.can not update.
+ |
+The NAT gateway is frozen.
+ |
+Check the NAT gateway status. The gateway may be frozen due to arrears and cannot be updated.
+ |
+
+400
+ |
+NAT.0106
+ |
+Concurrent conflict requests found
+ |
+Concurrent operations on the NAT gateway conflict.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.0107
+ |
+Create NG Port failed.
+ |
+Failed to create the internal port of the NAT gateway.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.0108
+ |
+NG Port %(port)s is unbound.
+ |
+Failed to bind the internal port to the NAT gateway.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.0109
+ |
+NatGateway does not support IPv6.
+ |
+NAT Gateway does not support IPv6 EIPs.
+ |
+Bind an IPv4 EIP.
+ |
+
+400
+ |
+NAT.0110
+ |
+Get Nat gateway host failed
+ |
+Failed to select the gateway node.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.0111
+ |
+Get Nat gateway agent local_ip failed
+ |
+Failed to obtain the gateway node IP address.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.0112
+ |
+Get RouteTable %(router_id)s failed.
+ |
+Failed to obtain the Virtual Private Cloud (VPC) route table.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.0113
+ |
+%(limit)s NAT gateways has been created to this VPC, no more is allowed
+ |
+The maximum number of NAT gateways has been reached.
+ |
+Create a NAT gateway in another VPC or delete existing NAT gateways in this VPC.
+ |
+
+400
+ |
+NAT.0201
+ |
+Endpoint is null or empty.
+//Endpoint is Invalid.
+//Request is null.
+//natGatewayId is invalid.
+//SnatRule id invalid.
+//NatGatewayId is invalid.
+//Invalid value for public ip id.
+//Endpoint is null.
+//request is null.
+//Query SnatRules list error marker is invalid.
+ |
+Incorrect SNAT rule parameter.
+ |
+Check whether the SNAT rule is correctly configured or contact technical support.
+ |
+
+400
+ |
+NAT.0202
+ |
+Either network_id or cidr must be specified.Both can not be specified at the same time
+ |
+The subnet for which the SNAT rule is configured conflicts with the VPC subnet.
+ |
+Do not configure both Cidr and Network_id when you are configuring an SNAT rule.
+ |
+
+400
+ |
+NAT.0203
+ |
+cidr is invalid, make sure it's format is correct.
+ |
+Invalid CIDR block.
+ |
+Enter a valid CIDR block, for example, 192.168.0.0/24.
+ |
+
+400
+ |
+NAT.0204
+ |
+source_type and network_id is incompatible.
+ |
+Invalid SNAT rule type.
+ |
+If the SNAT rule is configured for servers in a VPC, Source_Type is optional or must be set to 0.
+ |
+
+400
+ |
+NAT.0205
+ |
+cidr must be a subset of subnet's cidr.
+ |
+The CIDR block is not a subset of the VPC subnet.
+ |
+Enter a subset of the subnet CIDR block. For example, if the subnet is 192.168.0.0/24, cidr can be 192.168.0.0/25.
+ |
+
+400
+ |
+NAT.0206
+ |
+cidr conflicts with subnet's cidr.
+ |
+The CIDR block of the SNAT rule conflicts with the subnet CIDR block.
+ |
+If the SNAT rule is configured for subnets connected to a VPC through Direct Connect or Cloud Connect, the CIDR block cannot conflict with the VPC subnet CIDR block.
+ |
+
+400
+ |
+NAT.0207
+ |
+cidr in the request conflicts with cidrs of existing rules.
+ |
+The CIDR block conflicts with the existing one.
+ |
+Enter a CIDR block that does not conflict with existing ones.
+ |
+
+400
+ |
+NAT.0208
+ |
+Snat rule for network %(network)s exists.
+ |
+The rule already exists.
+ |
+Select a subnet that has no SNAT rules configured.
+ |
+
+400
+ |
+NAT.0210
+ |
+Invalid input for floating_ip_id. Reason: \'%(fip)s\' is not a valid UUID.
+//Invalid value for public ip id.
+ |
+The public IP address UUID of the SNAT rule is invalid.
+ |
+Enter a valid UUID.
+ |
+
+400
+ |
+NAT.0211
+ |
+%(limit)s EIP has been associated to this SNAT rules's EIP pool, no more is allowed.
+ |
+The maximum number of EIPs that can be bound to the SNAT rule has been reached.
+ |
+Ensure that the number of EIPs does not exceed the maximum number allowed.
+ |
+
+400
+ |
+NAT.0212
+ |
+SNAT Rule %(rule)s Associated or disassociate EIP %(fip)s Failed."
+ |
+Failed to bind the EIP to or unbind the EIP from the SNAT rule.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.0301
+ |
+get dnatRules error limit is invalid.
+//get dnatrules error marker is invalid.
+//endpoint is empty.
+//DnatRule id invalid.
+//VPC ID is invalid.
+//Request is null.
+//DnatRule id invalid.
+//internal_service_port_range' out of range(1-65535).
+//internal_service_port_range': invalid format.
+//internal_service_port_range': param is null.
+//'internal_service_port_range' and 'external_service_port_range' must be equal.
+//for non-all port rule,the protocol can not be any.
+//param xxx is null in request body.
+ |
+Incorrect DNAT rule parameter.
+ |
+Check whether the DNAT rule is correctly configured or contact technical support.
+ |
+
+400
+ |
+NAT.0302
+ |
+Dnat rule protocol %(protocol)s not supported.Only protocol values %(values)s and integer representations [6, 17, 0] are supported.
+ |
+Invalid DNAT rule protocol.
+ |
+Configure a valid protocol. The number can be 6, 17, or 0, corresponding to protocols TCP, UDP, and ANY, respectively.
+ |
+
+400
+ |
+NAT.0303
+ |
+Invalid value for port %(port)s
+ |
+Invalid port in the DNAT rule.
+ |
+Configure a valid internal port and external port. Supported range: 0 to 65535
+ |
+
+400
+ |
+NAT.0304
+ |
+The port_id, private_ip, internal port and protocol specified have been occupied.
+ |
+The internal network information in this DNAT rule conflicts with that in existing DNAT rules.
+ |
+Enter a VM port ID, or private IP address and internal port, that does not conflict with existing DNAT rules.
+ |
+
+400
+ |
+NAT.0305
+ |
+The floating ip, external port and protocol specified have been occupied.
+ |
+The external network information in this DNAT rule conflicts with that in existing DNAT rules.
+ |
+Enter a floating IP address ID, external port number, and protocol that do not conflict with those in existing DNAT rules.
+ |
+
+400
+ |
+NAT.0306
+ |
+The external port equals 0 and internal port equals 0 and protocol equals any must satisfied at the same time.
+ |
+Incorrect request for the DNAT rule.
+ |
+Set both the internal port and external port to 0 and protocol to ANY to make the configurations take effect.
+ |
+
+400
+ |
+NAT.0307
+ |
+The port_id already existing dnat allport rules or dnat_rules, can no longer create dnat rules or dnat allport rules.
+ |
+The port ID in this DNAT rule conflicts with that in an existing DNAT rule.
+ |
+Change the VM port ID to create a new DNAT rule or modify this DNAT rule.
+ |
+
+400
+ |
+NAT.0308
+ |
+The private_ip already existing dnat allport rules or dnat rules, can no longer create dnat rules or dnat allport rules.
+ |
+The private IP address configured in the DNAT rule conflicts with that in an existing DNAT rule.
+ |
+Change the private IP address or modify this DNAT rule.
+ |
+
+400
+ |
+NAT.0309
+ |
+%(limit)s DNAT rules has been associated to this NAT Gateway, no more is allowed
+ |
+The maximum number of DNAT rules has been reached.
+ |
+Ensure that the number of DNAT rules added to the NAT gateway is within the upper limit.
+ |
+
+400
+ |
+NAT.0310
+ |
+The port_id and private_ip values are both empty, at least one value is not empty.
+ |
+Some parameters of this DNAT rule are not configured.
+ |
+Check whether port_id and private_ip are configured. If no, configure at least one of them.
+ |
+
+400
+ |
+NAT.0311
+ |
+The private ip address is not legal.
+ |
+Invalid private IP address in the DNAT rule.
+ |
+Configure a valid private IP address.
+ |
+
+400
+ |
+NAT.0312
+ |
+The virtual IP address is not supported.
+ |
+Virtual IP addresses are not supported.
+ |
+Configure a valid private IP address.
+ |
+
+400
+ |
+NAT.0313
+ |
+%(limit)s DNAT rules has been associated to this Floating IP, no more is allowed
+ |
+The maximum number of DNAT rules has been reached.
+ |
+The maximum number of DNAT rules that are allowed to have the same floating IP address bound has been reached.
+ |
+
+400
+ |
+NAT.0314
+ |
+batch create dnat rules max limit: %(limit)s
+ |
+The maximum number of DNAT rules that can be added in batches has been reached.
+ |
+Reduce the number of DNAT rules and then add them in batches.
+ |
+
+400
+ |
+NAT.0315
+ |
+Port %(port)s is not a valid port.
+ |
+Invalid VM port ID in the DNAT rule.
+ |
+Configure a valid VM port ID.
+ |
+
+400
+ |
+NAT.0316
+ |
+Vtep_ip is Null.
+ |
+VtepIp must be specified.
+ |
+Delete this DNAT rule and create a new one, or contact technical support.
+ |
+
+400
+ |
+NAT.0317
+ |
+The port_id and private_ip exist at the same time and value is not empty, but at least one value is empty.
+ |
+The DNAT rule contains mutually exclusive parameters.
+ |
+Configure either port_id or private_ip.
+ |
+
+400
+ |
+NAT.0318
+ |
+DNAT rule is frozen, can no longer update.
+ |
+The DNAT rule has been frozen and cannot be updated.
+ |
+Check whether the floating IP address bound to the DNAT rule is in arrears or whether the user account is in arrears.
+ |
+
+400
+ |
+NAT.0401
+ |
+Floating Ip %(fip)s is freezed.
+ |
+The EIP is frozen.
+ |
+Select an EIP that is not frozen.
+ |
+
+400
+ |
+NAT.0402
+ |
+Floating Ip %(fip)s has associated with port %(port)s.
+ |
+The EIP has been bound to a port.
+ |
+Select an EIP that has not been bound to any resource. For example, if an EIP has been bound to an ECS, it cannot be bound to a NAT gateway.
+ |
+
+400
+ |
+NAT.0403
+ |
+There is a duplicate EIP %(fips)s in SNAT rule.
+ |
+The EIP has been used by an SNAT rule.
+ |
+Select another EIP.
+ |
+
+400
+ |
+NAT.0404
+ |
+Floating Ip %(fip)s has used by nat gateway %(nat_gateway)s.
+ |
+The EIP has been bound to a NAT gateway.
+ |
+Select another EIP.
+ |
+
+400
+ |
+NAT.0405
+ |
+Floating Ip %(fip)s has been occupied.
+ |
+The EIP is in use.
+ |
+Select another EIP.
+ |
+
+400
+ |
+NAT.0407
+ |
+Floating Ip %(fip)s is used by other rules
+ |
+The EIP has been bound to a rule.
+ |
+Select an EIP that is not in use.
+ |
+
+400
+ |
+NAT.0408
+ |
+Floating Ip %(fip)s can not be associated with both DNAT rule and DNAT all port rule.
+ |
+A DNAT rule cannot share an EIP with another DNAT rule in which mapping to a specific port is not set.
+ |
+Select another EIP.
+ |
+
+400
+ |
+NAT.0409
+ |
+Floating Ip %(fip)s can not be associated with both SNAT rule and DNAT all port rule.
+ |
+An SNAT rule cannot share an EIP with a DNAT rule in which mapping to a specific port is not set.
+ |
+Select another EIP.
+ |
+
+400
+ |
+NAT.0410
+ |
+Invalid value of the FloatIP.
+ |
+Invalid floating IP address.
+ |
+Enter a valid floating IP address.
+ |
+
+400
+ |
+VPC.0002
+ |
+Available zone Name is null.
+ |
+The AZ is left blank.
+ |
+Check whether availability_zone in the request body for creating a subnet is left blank.
+ |
+
+400
+ |
+VPC.0004
+ |
+VPC does not active, please try later.
+ |
+The VPC status is abnormal.
+ |
+Try again later or contact technical support.
+ |
+
+400
+ |
+VPC.0007
+ |
+urlTenantId is not equal tokenTenantId
+ |
+The tenant ID in the URL is different from that parsed in the token.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.0011
+ |
+EnterpriseProjectId is invalid
+ |
+Invalid enterprise project ID.
+ |
+Enter a valid enterprise project ID.
+ |
+
+400
+ |
+VPC.0014
+ |
+This enterpriseProject status is disable.
+ |
+Unavailable enterprise project.
+ |
+Use the ID of an available enterprise project.
+ |
+
+400
+ |
+VPC.2000
+ |
+Lack of user authority.
+//request is null.
+//endpoint is empty.
+//resource type is invalid.
+//create natgateway requset is null.
+//update natgateway request is null.
+ |
+NAT gateway request error.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2001
+ |
+NatGateway id is invalid.
+//the enterprise project id in request is invalid.
+//request parameter is null.
+//tags is invalid.
+//get natgateways error limit is invalid.
+//get natgateways error marker is invalid.
+//Only admin user can do this action.
+//Parameters are invalid, check them and try.
+ |
+Incorrect NAT gateway parameter.
+ |
+Check whether the NAT gateway is correctly configured or contact technical support.
+ |
+
+400
+ |
+VPC.2002
+ |
+Invalid parameters.
+ |
+Invalid request parameter.
+ |
+Check whether the input parameter is correct.
+ |
+
+400
+ |
+VPC.2004
+ |
+NatGateway %(nat_gateway_id)s is not ACTIVE.
+ |
+The NAT gateway is not activated.
+ |
+If the NAT gateway is not in the running state for a long time, contact technical support.
+ |
+
+400
+ |
+VPC.2005
+ |
+NatGateway %(nat_gateway_id)s is not UP.
+ |
+The NAT gateway is not in the UP state.
+ |
+Check whether the gateway has been frozen due to arrears or other reasons.
+ |
+
+400
+ |
+VPC.2006
+ |
+NatGateway %(nat_gateway_id)s is frozen.can not update
+ |
+The NAT gateway is frozen.
+ |
+Check whether the gateway is frozen due to arrears. If yes, it cannot be updated.
+ |
+
+400
+ |
+VPC.2007
+ |
+NatGateway %(nat_gateway_id)s does not exist.
+ |
+The NAT gateway is not found.
+ |
+Check whether the NAT gateway ID is correct.
+ |
+
+400
+ |
+VPC.2008
+ |
+Network %(network)s does not contain any IPv4 subnet
+ |
+No subnets added in this VPC.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2009
+ |
+Network %(network_id)s does not exist.
+ |
+The subnet is not found.
+ |
+Enter a valid subnet.
+ |
+
+400
+ |
+VPC.2010
+ |
+The router %(router_id)s has default route.
+ |
+The default route already exists.
+ |
+Delete the default route and then create a NAT gateway.
+ |
+
+400
+ |
+VPC.2011
+ |
+The router %(router_id)s does not exist.
+ |
+The router is not found.
+ |
+Check whether the entered router ID is correct.
+ |
+
+400
+ |
+VPC.2012
+ |
+The router %(router_id)s already has nat gateway.
+ |
+The VPC already has a NAT gateway.
+ |
+Select another VPC.
+ |
+
+400
+ |
+VPC.2013
+ |
+Router %(router)s has no port for subnet %(subnet)s.
+ |
+The subnet is not connected to the virtual router.
+ |
+Add the subnet to the router port.
+ |
+
+400
+ |
+VPC.2014
+ |
+Endpoint is null or empty.
+//Endpoint is Invalid.
+//Request is null.
+//natGatewayId is invalid.
+//SnatRule id invalid.
+//NatGatewayId is invalid.
+//Invalid value for public ip id.
+//Endpoint is null.
+//request is null.
+//Query SnatRules list error marker is invalid.
+ |
+Incorrect SNAT rule parameter.
+ |
+Check whether the SNAT rule is correctly configured or contact technical support.
+ |
+
+400
+ |
+VPC.2016
+ |
+Rule has not been deleted.
+ |
+NAT gateway deletion failed because its rule has not been deleted.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2018
+ |
+Snat rule for network %(network)s exists.
+ |
+The rule already exists.
+ |
+Select a subnet that has no SNAT rules configured.
+ |
+
+400
+ |
+VPC.2019
+ |
+Resource %(res_type)s %(res)s is used by %(user_type)s %(user)s
+ |
+The resource is in use.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2020
+ |
+get dnatRules error limit is invalid.
+//get dnatrules error marker is invalid.
+//endpoint is empty.
+//DnatRule id invalid.
+//Request is null.
+//DnatRule id invalid.
+//DnatRule natGatewayId id invalid.
+ |
+Incorrect DNAT rule parameter.
+ |
+Check whether the DNAT rule is correctly configured or contact technical support.
+ |
+
+400
+ |
+VPC.2022
+ |
+Port %(port)s is not a valid port.
+ |
+Invalid VM port ID in the DNAT rule.
+ |
+Configure a valid VM port ID.
+ |
+
+400
+ |
+VPC.2023
+ |
+The port_id, private_ip, internal port and protocol specified have been occupied.
+ |
+The internal network information in this DNAT rule conflicts with that in existing DNAT rules.
+ |
+Enter a VM port ID, or private IP address and internal port, that does not conflict with existing DNAT rules.
+ |
+
+400
+ |
+VPC.2024
+ |
+The floating ip, external port and protocol specified have been occupied.
+ |
+The external network information in this DNAT rule conflicts with that in existing DNAT rules.
+ |
+Enter a floating IP address ID, external port number, and protocol that do not conflict with those in existing DNAT rules.
+ |
+
+400
+ |
+VPC.2026
+ |
+%(limit)s DNAT rules has been associated to this Floating IP, no more is allowed
+ |
+The maximum number of DNAT rules that are allowed to have the same floating IP address bound has been reached.
+ |
+Reduce the number of DNAT rules.
+ |
+
+400
+ |
+VPC.2027
+ |
+The port_id already existing dnat allport rules or dnat_rules, can no longer create dnat rules or dnat allport rules.
+ |
+The port ID in this DNAT rule conflicts with that in an existing DNAT rule.
+ |
+Change the VM port ID to create a new DNAT rule or modify this DNAT rule.
+ |
+
+400
+ |
+VPC.2028
+ |
+The private_ip already existing dnat allport rules or dnat rules, can no longer create dnat rules or dnat allport rules.
+ |
+The private IP address configured in the DNAT rule conflicts with that in an existing DNAT rule.
+ |
+Change the private IP address or modify this DNAT rule.
+ |
+
+400
+ |
+VPC.2029
+ |
+DNAT rule is frozen, can no longer update.
+ |
+The DNAT rule has been frozen and cannot be updated.
+ |
+Check whether the floating IP address bound to the DNAT rule is in arrears or whether the user account is in arrears.
+ |
+
+400
+ |
+VPC.2030
+ |
+The system is busy. Please try again later.
+ |
+The system is busy. Please try again later.
+ |
+Try again later.
+ |
+
+400
+ |
+VPC.2031
+ |
+Either network_id or cidr must be specified.Both can not be specified at the same time
+ |
+The subnet for which the SNAT rule is configured conflicts with the VPC subnet.
+ |
+Do not configure both Cidr and Network_id when you are configuring an SNAT rule.
+ |
+
+400
+ |
+VPC.2032
+ |
+cidr is invalid, make sure it's format is correct.
+ |
+Invalid CIDR block.
+ |
+Enter a valid CIDR block, for example, 192.168.0.0/24.
+ |
+
+400
+ |
+VPC.2033
+ |
+source_type and network_id is incompatible.
+ |
+Invalid SNAT rule type.
+ |
+If the SNAT rule is configured for servers in a VPC, Source_Type is optional or must be set to 0. If the SNAT rule is configured for servers in your on-premises data centers that are connected to a VPC through Direct Connect or your servers in another VPC, Source_Type must be set to 1.
+ |
+
+400
+ |
+VPC.2034
+ |
+cidr must be a subset of subnet's cidr.
+ |
+The CIDR block is not a subset of the VPC subnet.
+ |
+Enter a subset of the subnet CIDR block. For example, if the subnet is 192.168.0.0/24, cidr can be 192.168.0.0/25.
+ |
+
+400
+ |
+VPC.2035
+ |
+cidr conflicts with subnet's cidr.
+ |
+The CIDR block of the SNAT rule conflicts with the subnet CIDR block.
+ |
+If the SNAT rule is configured for subnets connected to a VPC through Direct Connect or Cloud Connect, the CIDR block cannot conflict with the VPC subnet CIDR block.
+ |
+
+400
+ |
+VPC.2036
+ |
+cidr in the request conflicts with cidrs of existing rules.
+ |
+The CIDR block conflicts with the existing one.
+ |
+Enter a CIDR block that does not conflict with existing ones.
+ |
+
+400
+ |
+VPC.2037
+ |
+The virtual IP address is not supported.
+ |
+Virtual IP addresses are not supported.
+ |
+Configure a valid private IP address.
+ |
+
+400
+ |
+VPC.2038
+ |
+%(limit)s DNAT rules has been associated to this NAT Gateway, no more is allowed
+ |
+The maximum number of DNAT rules has been reached.
+ |
+Delete some DNAT rules.
+ |
+
+400
+ |
+VPC.2039
+ |
+%(limit)s EIP has been associated to this SNAT rules's EIP pool, no more is allowed.
+ |
+The maximum number of EIPs bound to the SNAT rule has been reached.
+ |
+Reduce the number of EIPs.
+ |
+
+400
+ |
+VPC.2040
+ |
+Invalid value for public ip id.
+ |
+The public IP address ID of an SNAT rule cannot be left blank.
+ |
+Enter a valid UUID.
+ |
+
+400
+ |
+VPC.2042
+ |
+There is a duplicate EIP %(fips)s in SNAT rule.
+ |
+The EIP has been used by an SNAT rule.
+ |
+Select another EIP.
+ |
+
+400
+ |
+VPC.2043
+ |
+Floating Ip %(fip)s is used by other rules
+ |
+The EIP has been bound to a rule.
+ |
+Select another EIP.
+ |
+
+400
+ |
+VPC.2044
+ |
+Invalid input for floating_ip_id. Reason: \'%(fip)s\' is not a valid UUID.
+ |
+The public IP address UUID of the SNAT rule is invalid.
+ |
+Enter a valid UUID.
+ |
+
+400
+ |
+VPC.2045
+ |
+Get Nat gateway host failed
+ |
+Failed to select the gateway node.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2046
+ |
+Get Nat gateway agent local_ip failed
+ |
+Failed to obtain the gateway node IP address.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2047
+ |
+Get RouteTable %(router_id)s failed.
+ |
+Failed to obtain the VPC route table.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2048
+ |
+Invalid value for created_at %(timestamp)s.
+ |
+Invalid timestamp.
+ |
+Make sure that you enter the time in the correct format.
+ |
+
+400
+ |
+VPC.2049
+ |
+DB Error
+ |
+The database is abnormal.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2050
+ |
+Concurrent conflict requests found
+ |
+Concurrent operations on the NAT gateway conflict.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2051
+ |
+Create NG Port failed.
+ |
+Failed to create the internal port of the NAT gateway.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2052
+ |
+NG Port %(port)s is unbound.
+ |
+Failed to bind the internal port to the NAT gateway.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2053
+ |
+NatGateway does not support IPv6.
+ |
+NAT Gateway does not support IPv6 EIPs.
+ |
+Bind an IPv4 EIP.
+ |
+
+400
+ |
+VPC.2054
+ |
+Dnat rule protocol %(protocol)s not supported.Only protocol values %(values)s and integer representations [6, 17, 0] are supported.
+ |
+Invalid DNAT rule protocol.
+ |
+Configure a valid protocol. The number can be 6, 17, or 0, corresponding to protocols TCP, UDP, and ANY, respectively.
+ |
+
+400
+ |
+VPC.2055
+ |
+The port_id and private_ip exist at the same time and value is not empty, but at least one value is empty.
+ |
+The DNAT rule contains mutually exclusive parameters.
+ |
+Configure either port_id or private_ip.
+ |
+
+400
+ |
+VPC.2056
+ |
+The port_id and private_ip values are both empty, at least one value is not empty.
+ |
+Some parameters of this DNAT rule are not configured.
+ |
+Check whether port_id and private_ip are configured. If no, configure at least one of them.
+ |
+
+400
+ |
+VPC.2057
+ |
+batch create dnat rules max limit: %(limit)s
+ |
+The maximum number of DNAT rules allowed to be added in batches has been exceeded.
+ |
+Reduce the number of DNAT rules for batch addition.
+ |
+
+400
+ |
+VPC.2058
+ |
+Vtep_ip is Null.
+ |
+VtepIp must be specified.
+ |
+Contact technical support.
+ |
+
+400
+ |
+VPC.2059
+ |
+Floating Ip %(fip)s is freezed.
+ |
+The EIP is frozen.
+ |
+Select an EIP that is not frozen.
+ |
+
+400
+ |
+VPC.2060
+ |
+Floating Ip %(fip)s has associated with port %(port)s.
+ |
+The EIP has been bound to a port.
+ |
+Select an EIP that has not been bound to any resource. For example, if an EIP has been bound to an ECS, it cannot be bound to a NAT gateway.
+ |
+
+400
+ |
+VPC.2061
+ |
+Floating Ip %(fip)s has used by nat gateway %(nat_gateway)s.
+ |
+The EIP has been bound to a NAT gateway.
+ |
+Select another EIP.
+ |
+
+400
+ |
+VPC.2062
+ |
+Floating Ip %(fip)s has been occupied.
+ |
+The EIP is in use.
+ |
+Select another EIP.
+ |
+
+400
+ |
+VPC.2069
+ |
+Invalid value for port %(port)s
+ |
+Invalid port in the DNAT rule.
+ |
+Configure a valid internal port and external port. Supported range: 0 to 65535
+ |
+
+400
+ |
+VPC.2070
+ |
+The external port equals 0 and internal port equals 0 and protocol equals any must satisfied at the same time.
+ |
+Incorrect request for the DNAT rule.
+ |
+Set the private port number and public port number to 0 and Protocol to Any.
+ |
+
+400
+ |
+VPC.2071
+ |
+The private ip address is not legal.
+ |
+Invalid private IP address in the DNAT rule.
+ |
+Configure a valid private IP address.
+ |
+
+400
+ |
+VPC.2073
+ |
+Floating Ip %(fip)s can not be associated with both DNAT rule and DNAT all port rule.
+ |
+A DNAT rule cannot share an EIP with another DNAT rule in which mapping to a specific port is not set.
+ |
+Select another EIP.
+ |
+
+400
+ |
+VPC.2074
+ |
+Floating Ip %(fip)s can not be associated with both SNAT rule and DNAT all port rule.
+ |
+An SNAT rule cannot share an EIP with another DNAT rule in which mapping to a specific port is not set.
+ |
+Select another EIP.
+ |
+
+400
+ |
+VPC.2075
+ |
+Enter a maximum of 255 characters.
+ |
+The description contains more than 255 characters.
+ |
+Enter a maximum of 255 characters.
+ |
+
+400/404
+ |
+NAT.0105
+ |
+NatGateway %(nat_gateway_id)s does not exist.
+ |
+The NAT gateway is not found. (HTTP status code 400 indicates that the gateway to be deleted is not found. HTTP status code 404 indicates that the gateway that you created or queried is not found.)
+ |
+Check whether the NAT gateway ID is available.
+ |
+
+401
+ |
+NAT.0025
+ |
+Token is expired.
+ |
+Token expired.
+ |
+Check whether the token is within the validity period.
+ |
+
+401
+ |
+VPC.0008
+ |
+Invalid token in the header.
+ |
+Invalid token.
+ |
+Check whether the token in the request header is valid.
+ |
+
+401
+ |
+VPC.0009
+ |
+real-name authentication fail.
+ |
+Real-name authentication failed.
+ |
+Contact technical support.
+ |
+
+403
+ |
+VPC.0010
+ |
+Rules on xx by ** disallowed by policy
+ |
+Insufficient permissions to call the underlying system.
+ |
+Obtain required permissions.
+ |
+
+403
+ |
+VPC.2201
+ |
+Policy doesn't allow <x:x:x> to be performed
+ |
+Insufficient fine-grained permissions.
+ |
+Obtain required permissions.
+ |
+
+403
+ |
+VPC.2701
+ |
+Token not allowed to do this action.
+ |
+You do not have permissions to perform this operation, or your account balance is insufficient.
+ |
+Check whether your account balance is insufficient or whether your account has been frozen.
+ |
+
+404
+ |
+NAT.0004
+ |
+The router %(router_id)s does not exist.
+ |
+The router is not found.
+ |
+Check whether the entered router ID is correct.
+ |
+
+404
+ |
+NAT.0005
+ |
+Network %(network_id)s does not exist.
+ |
+The subnet is not found.
+ |
+Enter a valid subnet.
+ |
+
+404
+ |
+NAT.0013
+ |
+Router %(router)s for the specified NAT gateway could not be found.
+ |
+The route for the specified NAT gateway is not found.
+ |
+Create a route for the specified NAT gateway.
+ |
+
+404
+ |
+NAT.0019
+ |
+Network ********-****-****-****-************* could not be found.
+ |
+The subnet ID is not found.
+ |
+Check whether the subnet ID is available.
+ |
+
+404
+ |
+NAT.0020
+ |
+Specifying 'tenant_id' other than authenticated tenant in request requires admin privileges
+ |
+tenant_id is left blank or not found.
+ |
+Check whether the tenant ID is available.
+ |
+
+404
+ |
+NAT.0021
+ |
+Invalid input for nat_gateway_id. Reason: '********-****-****-****-*************'is not a valid UUID.
+ |
+Nat_gateway_id is left blank or not found.
+ |
+Check whether the NAT gateway ID is available.
+ |
+
+404
+ |
+NAT.0023
+ |
+Port '********-****-****-****-*************' could not be found.
+ |
+The port ID is not found.
+ |
+Check whether the port ID is available.
+ |
+
+404
+ |
+NAT.0024
+ |
+Invalid input for floating_ip_id. Reason: '********-****-****-****-*************'is not a valid UUID.
+ |
+Floating_ip_id is left blank, not found, or is invalid.
+ |
+Check whether the floating IP address ID is correct.
+ |
+
+404
+ |
+NAT.0209
+ |
+No Snat Rule exist with id %(id)s
+ |
+The SNAT rule is not found.
+ |
+Check whether the SNAT rule ID is available.
+ |
+
+404
+ |
+NAT.0319
+ |
+No Dnat Rule exist with id %(id)s
+ |
+The DNAT rule is not found.
+ |
+Contact technical support.
+ |
+
+404
+ |
+VPC.0003
+ |
+VPC does not exit.
+ |
+The VPC is not found.
+ |
+Check whether the VPC ID is valid or whether the VPC is available.
+ |
+
+400
+ |
+NAT.1010
+ |
+Request parameter Json parsing failed %s.
+ |
+Parsing JSON request failed.
+ |
+Check whether the request parameters are in the correct format.
+ |
+
+400
+ |
+NAT.1015
+ |
+Tags parameter is illegal.
+ |
+Invalid tag.
+ |
+Enter a valid tag value.
+ |
+
+400
+ |
+NAT.1016
+ |
+The number of tags exceeds the limit %s.
+ |
+The maximum number of tags has been reached.
+ |
+Add up to %s tags.
+ |
+
+400
+ |
+NAT.1022
+ |
+Account is restricted, operation is forbidden.
+ |
+The private NAT gateway cannot be created because your account has been suspended.
+ |
+Check whether your account is suspended and contact technical support.
+ |
+
+400
+ |
+NAT.1023
+ |
+Account is suspended, operation is forbidden.
+ |
+The private NAT gateway cannot be created because your account has been frozen.
+ |
+Check whether your account is frozen and contact technical support.
+ |
+
+400
+ |
+NAT.1101
+ |
+Transit subnet can not be create with this network %s.
+//External subnet can not be create with this network %s.
+ |
+The subnet where the transit IP address is located is unavailable.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.1201
+ |
+%s downlink vpc has been associated to this private nat gateway, no more is allowed.
+ |
+Only one downlink_vpc can be entered.
+ |
+Enter only one downlink_vpc.
+ |
+
+400
+ |
+NAT.1202
+ |
+There are one or more rules still in use on the gateway %s, can not be deleted.
+ |
+The private NAT gateway cannot be deleted because it has rules.
+ |
+Delete a private NAT gateway after deleting all its rules.
+ |
+
+400
+ |
+NAT.1204
+ |
+This vpc at most have %s private nat gateway.
+ |
+The maximum number of private NAT gateways in the VPC has been reached.
+ |
+Use another VPC or delete other private NAT gateways in this VPC.
+ |
+
+400
+ |
+NAT.1206
+ |
+Update (%s) spec to (%s) are the same as the original.
+ |
+The private NAT gateway can be updated only to different specifications.
+ |
+Update the private NAT gateway to different specifications.
+ |
+
+400
+ |
+NAT.1207
+ |
+Gateway %s already has %d rules, the maximum number of rule for spec %s is %d. Downgrade is forbidden. //Add this gateway rule over rule max %d.
+ |
+The maximum number of rules that can be added on the private NAT gateway of the new specifications has been exceeded, so the gateway specifications cannot be updated. The maximum number of NAT gateway rules has been reached. No more rules can be created.
+ |
+Ensure that the number of rules added on the private NAT gateway does not exceed the maximum number of rules after the update. Delete some rules or update the private NAT gateway to more robust specifications.
+ |
+
+400
+ |
+NAT.1208
+ |
+Gateway %s is frozen, create operation is forbidden. //Gateway %s is frozen, delete operation is forbidden. //Gateway %s is frozen, update operation is forbidden.
+ |
+Operation not allowed. The private NAT gateway has been frozen.
+ |
+Check whether your private NAT gateway is frozen and contact technical support.
+ |
+
+400
+ |
+NAT.1306
+ |
+dnat Parameters entered are illegal, protocol:any should be entered with internal_service_port:0 and transit_service_port:0 together.
+//dnat Parameters entered are illegal, protocol:any should be entered with internal_service_port:0 and external_service_port:0 together.
+ |
+Invalid parameters in the request body of the DNAT rule.
+ |
+Set protocol to any, internal_service_port to 0, and transit_service_port to 0.
+ |
+
+400
+ |
+NAT.1311
+ |
+The networkInterfaceId(port_id) and private_ip_address(fixed_ip_address) exist at the same time or both are empty, but at least one value is empty.
+ |
+Either network_interface_id or private_ip_address must be specified.
+ |
+Specify network_interface_id or private_ip_address.
+ |
+
+400
+ |
+NAT.1404
+ |
+No more IP addresses available on subnet %s.
+ |
+There are no available IP addresses in the subnet.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.1405
+ |
+IP address %s is not a valid IP for the subnet.
+ |
+Invalid IP address in the subnet.
+ |
+Contact technical support.
+ |
+
+400
+ |
+NAT.1501
+ |
+Either virSubnet(network) or cidr must be specified." + "Both can not be specified at the same time.
+ |
+Either virsubnet_id or cidr must be specified.
+ |
+Specify virsubnet_id or cidr.
+ |
+
+400
+ |
+NAT.1502
+ |
+Cidr is invalid, make sure it's format is correct.
+ |
+Invalid cidr.
+ |
+Enter a valid CIDR block, for example, 192.168.0.0/24.
+ |
+
+400
+ |
+NAT.1506
+ |
+%s transit ip has been associated to this SNAT rules's transit ip pool, no more is allowed.
+//%s external ip has been associated to this SNAT rules's external ip pool, no more is allowed.
+ |
+The maximum number of transit IP addresses that can be selected for the SNAT rule has been exceeded.
+ |
+Enter only one transit IP address.
+ |
+
+400
+ |
+NAT.1507
+ |
+'transit_ip_id' attribute value should be 'uuid' type!
+//'external_ip_id' attribute value should be 'uuid' type!
+ |
+Invalid transit_ip_id.
+ |
+Enter the transit_ip_id value in UUID format.
+ |
+
+404
+ |
+NAT.1002
+ |
+%s %s could not be found.
+ |
+The resource is not found.
+ |
+Check whether the resource is available or contact technical support.
+ |
+
+404
+ |
+NAT.1003
+ |
+VirSubnet %s could not be found in vpc for gateway %s.
+ |
+The subnet for which the SNAT rule is configured is not in the VPC of the private NAT gateway.
+ |
+Ensure that the subnet for which the SNAT rule is configured is in the VPC of the private NAT gateway.
+ |
+
+404
+ |
+NAT.1009
+ |
+Port %s information is missing.
+ |
+Port information is missing.
+ |
+Contact technical support.
+ |
+
+409
+ |
+NAT.1303
+ |
+Transit ip %s is in this vpc, not support to specified.
+//External ip %s is in this vpc, not support to specified.
+ |
+The VPC of the transit IP address must be different from that of the private NAT gateway.
+ |
+Use a transit IP address that is in a different VPC of the private NAT gateway.
+ |
+
+409
+ |
+NAT.1304
+ |
+Port %s is not in this vpc, not support to specified.
+ |
+The port for which the DNAT rule is configured is not in the VPC of the private NAT gateway.
+ |
+Ensure that the port for which the DNAT rule is configured is in the VPC of the private NAT gateway.
+ |
+
+409
+ |
+NAT.1305
+ |
+Transit ip %s is used by exist dnat rule.
+//External ip %s is used by exist dnat rule.
+ |
+The transit IP address is already used by a DNAT rule.
+ |
+Use a transit IP address that is not used by any DNAT rule.
+ |
+
+409
+ |
+NAT.1307
+ |
+Internal parameters entered conflict with exist dnat rules. //PrivateIp(FixedIp) %s is used by exist dnat rule.
+ |
+The internal network information in this DNAT rule conflicts with that in existing DNAT rules.
+ |
+Use a port, private IP address, backend port, and protocol that do not conflict with those of existing DNAT rules.
+ |
+
+409
+ |
+NAT.1308
+ |
+Transit ip %s is used by exist snat rule.
+//External ip %s is used by exist snat rule.
+ |
+The transit IP address is already used by an SNAT rule.
+ |
+Use a transit IP address that is not used by any SNAT rule.
+ |
+
+409
+ |
+NAT.1309
+ |
+Port %s is used by exist dnat rule.
+ |
+The port is being used by a DNAT rule of another protocol type.
+ |
+Use a port that is not used by DNAT rules of another protocol type.
+ |
+
+409
+ |
+NAT.1310
+ |
+Transit parameters entered conflict with exist dnat rules.
+//External parameters entered conflict with exist dnat rules.
+ |
+The external network information in this DNAT rule conflicts with the existing one.
+ |
+Use a transit IP address, port number, and protocol that do not conflict with those in existing DNAT rules.
+ |
+
+409
+ |
+NAT.1403
+ |
+Unable to complete operation for subnet %s. The IP address %s is in use.
+ |
+This IP address is already in use.
+ |
+Contact technical support.
+ |
+
+409
+ |
+NAT.1406
+ |
+Transit ip %s has used by private nat gateway %s.
+//External ip %s has used by private nat gateway %s.
+ |
+The transit IP address has been used by another private NAT gateway.
+ |
+Use a transit IP address that is not used by other private NAT gateways.
+ |
+
+409
+ |
+NAT.1409
+ |
+Transit ip %s is used by rules.
+//External ip %s is used by rules.
+ |
+The transit IP address is used by a rule.
+ |
+Ensure that the transit IP address is not used by other rules before deleting it.
+ |
+
+409
+ |
+NAT.1410
+ |
+Transit ip %s is used by dnat rules of other protocols.
+//External ip %s is used by dnat rules of other protocols.
+ |
+The transit IP address is being used by a DNAT rule of another protocol type.
+ |
+Use a transit IP address that is not used by DNAT rules of another protocol type.
+ |
+
+409
+ |
+NAT.1503
+ |
+Snat rule for network %s exists.
+ |
+An SNAT rule has been configured for this subnet.
+ |
+Select a subnet that has no SNAT rules configured.
+ |
+
+409
+ |
+NAT.1505
+ |
+Snat rule for cidr %s exists.
+ |
+An SNAT rule has been configured for this CIDR block.
+ |
+Enter a CIDR block that does not conflict with existing ones.
+ |
+
+500
+ |
+NAT.1001
+ |
+Internal Server Error.
+ |
+Internal service error.
+ |
+Contact technical support.
+ |
+
+500
+ |
+NAT.1004
+ |
+Create Port Failed with subnet %s.
+ |
+Failed to create the port in the subnet.
+ |
+Contact technical support.
+ |
+
+500
+ |
+NAT.1005
+ |
+Delete Port %s Failed.
+ |
+Port deletion failed.
+ |
+Contact technical support.
+ |
+
+
+