vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/elb/umn/elb_ug_fz_0006.html
zhoumeng 58b2c5fa4f elb_umn_20230303 
Reviewed-by: Hajba, László Antal <laszlo-antal.hajba@t-systems.com>
Co-authored-by: zhoumeng <zhoumeng35@huawei.com>
Co-committed-by: zhoumeng <zhoumeng35@huawei.com>
2023-03-03 16:05:26 +00:00

3.5 KiB
Raw Blame History

Modifying Load Balancer Settings

Scenarios

You can modify the bandwidth used by the EIP bound to the load balancer as required.

Modifying the Bandwidth

  1. Log in to the management console.
  2. In the upper left corner of the page, click and select the desired region and project.
  3. Hover on in the upper left corner to display Service List and choose Network > Elastic Load Balancing.
  4. On the Load Balancers page:

    Dedicated load balancers: Click Elastic Load Balancers, locate the load balancer whose bandwidth you want to modify and click Modify IPv4 Bandwidth or More > Modify IPv6 Bandwidth in the Operation column (if the load balancer has an IPv6 address that has been added to a shared bandwidth).

    Shared load balancers: Click Elastic Load Balancers, locate the load balancer whose bandwidth you want to modify and click Modify Bandwidth or Modify IPv4 Bandwidth in the Operation column (in regions where either dedicated load balancers or both shared and dedicated load balancers are available).

  5. In the New Configuration area, change the bandwidth and click Next.

    Select the bandwidth defined by the system or enter a value from 5 Mbit/s to 2,000 Mbit/s.

    You can also change the bandwidth name.

  6. Confirm the modified bandwidth and click Submit.
Parent topic: Load Balancer