vpruthi/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
doc-exports/docs/natgw/umn/nat_qs_0005.html
Qin Ying, Fan fde3473737 NATGW UMN 20230922 version 
Reviewed-by: Sarda, Priya <prsarda@noreply.gitea.eco.tsi-dev.otc-service.com>
Co-authored-by: Qin Ying, Fan <fanqinying@huawei.com>
Co-committed-by: Qin Ying, Fan <fanqinying@huawei.com>
2024-01-17 09:50:38 +00:00

2.1 KiB
Raw Blame History

Step 4: Verify the Result

Scenarios

After adding an SNAT rule, you can perform the following steps to verify the connection:

  1. Verify that the SNAT rule has been added for the public NAT gateway.
  2. Verify that servers that have no EIPs bound can access the Internet through the NAT gateway.

Prerequisites

An SNAT rule has been added.

Procedure

  1. Log in to the management console.
  2. Click in the upper left corner and select the desired region and project.
  3. Under Network, select NAT Gateway.
  4. On the displayed page, click the name of the target NAT gateway.
  5. In the SNAT rule list, you can view details about the SNAT rule. If Status is Running, the SNAT rule has been added successfully.