forked from docs/doc-exports
Qin Ying, Fan
4d053b2368
Reviewed-by: Sarda, Priya <prsarda@noreply.gitea.eco.tsi-dev.otc-service.com> Co-authored-by: Qin Ying, Fan <fanqinying@huawei.com> Co-committed-by: Qin Ying, Fan <fanqinying@huawei.com>
6.3 KiB
6.3 KiB
Creating a Propagation for an Attachment in the Route Table
Scenarios
This section describes how to create a propagation in the route table of an enterprise router.
Notes
You can create propagations for the same attachment in different route tables.
Procedure
- Log in to the management console.
- Click
in the upper left corner and select the desired region and project. - Click Service List and choose Networking > Enterprise Router.
The Enterprise Router page is displayed.
- Search for the target enterprise router by name.Figure 1 Searching for an enterprise router
- Go to the Route Tables tab using either of the following methods:
- In the upper right corner of the enterprise router, click Manage Route Table.
- Click the enterprise router name and click Route Tables.
Figure 2 Create Propagation
- Click the route table where you want to create a propagation. On the Propagations tab, click Create Propagation.
The Create Propagation dialog box is displayed.
- Configure the parameters based on Table 1.
Table 1 Parameters for creating a propagation Parameter
Setting
Example Value
Attachment Type
Mandatory
Select an attachment type.- VPC: A VPC is attached to the enterprise router.
- Virtual gateway: A Direct Connect virtual gateway is attached to the enterprise router.
- VPN gateway: A VPN gateway is attached to the enterprise router.
For more information, see Attachment Overview.
VPC
Attachment
Mandatory
In the drop-down list, select the attachment who will propagate routes to the route table.
er-attach-02
- Click OK.
The propagation list is displayed. You can view your propagation.
Parent topic: Propagations