yexinru/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
Files
4304fed907e855cff654b88d018df17d833cf3f2
doc-exports/docs/ecs/umn/en-us_topic_0198270920.html
wanghuijuan738 2a915e26a2 ECS UMN 250919 verison. Added the vtpm section. 
Reviewed-by: Pristromskaia, Margarita <margarita.pristromskaia@t-systems.com>
Co-authored-by: wanghuijuan738 <wanghuijuan738@huawei.com>
Co-committed-by: wanghuijuan738 <wanghuijuan738@huawei.com>
2025-11-28 08:41:30 +00:00

13 KiB
Raw Blame History

How Do I Configure DNS for an ECS?

Scenarios

Configure a DNS server for resolving the domain name of an ECS. By default, the IP address of the DNS server is automatically configured when an ECS is created. No manual configuration is needed except when the resolution fails due to a change in the DNS server IP address.

The DNS server IP address is 100.125.4.25.

You can configure DNS for an ECS as follows:

Procedure (Linux)

This section uses CentOS 7.5 as an example.

  1. Log in to the ECS as user root.
  2. Run the vi /etc/resolv.conf command to edit the /etc/resolv.conf file. Add the DNS server IP address above the existing nameserver information.

    Figure 1 Configuring DNS
    The format is as follows:
    nameserver 100.125.4.25

  3. Press Esc, input :wq, and press Enter to save the changes and exit the vi editor.
  4. Run the following command to check whether the IP address is successfully added:

    cat /etc/resolv.conf

  5. Run the following command to check whether an IP address can be resolved from the file system domain name:

    nslookup File system domain name

    Obtain the file system domain name from the file system mount point.

  6. (Optional) In a network environment that uses the DHCP server, edit the /etc/resolv.conf file to prevent the file from being automatically modified upon an ECS startup, and prevent the DNS server IP address added in 2 from being reset.

    1. Run the following command to lock the file:
      chattr +i /etc/resolv.conf

      Run the chattr -i /etc/resolv.conf command to unlock the file if needed.

    2. Run the following command to check whether the editing is successful:

      lsattr /etc/resolv.conf

      If the information shown in Figure 2 is displayed, the file is locked.

      Figure 2 A locked file

Procedure (Windows)

This section uses Windows Server 2012 as an example.

  1. Go to the ECS console and log in to the ECS running Windows Server 2012.
  2. Click This PC in the lower left corner.
  3. On the page that is displayed, right-click Network and choose Properties from the drop-down list. The Network and Sharing Center page is displayed, as shown in Figure 3. Click Local Area Connection.

    Figure 3 Page for network and sharing center

  4. In the Activity area, select Properties. See Figure 4.

    Figure 4 Local area connection

  5. In the Local Area Connection Properties dialog box that is displayed, select Internet Protocol Version 4 (TCP/IPv4) and click Properties. See Figure 5.

    Figure 5 Local area connection properties

  6. In the dialog box that is displayed, select Use the following DNS server addresses: and configure DNS, as shown in Figure 6. The DNS server IP address is 100.125.4.25. After completing the configuration, click OK.

    Figure 6 Configuring DNS on Windows

Parent topic: Network Configuration
<script language="JavaScript"> </script>