yexinru/doc-exports
1
0
Fork 0
forked from docs/doc-exports
Code Pull Requests Activity
Files
c285e88a17b826bfd96f894ee59ced12881a3135
doc-exports/docs/mrs/umn/ALM-12200.html
yangtong c285e88a17 MRS UMN 20250806 version 
Reviewed-by: Pruthi, Vineet <vineet.pruthi@t-systems.com>
Co-authored-by: yangtong <yangtong2@huawei.com>
Co-committed-by: yangtong <yangtong2@huawei.com>
2025-09-02 10:43:57 +00:00

8.5 KiB
Raw Blame History

ALM-12200 Password Is About to Expire

Alarm Description

The system checks whether a user password is about to expire at 1:00 a.m. every day. This alarm is generated when a user password is about to expire in less than 5 days by default.

This alarm is cleared when the password is about to expire in at least five days by default.

This alarm applies only to MRS 3.3.1 or later.

Alarm Attributes

Alarm ID

Alarm Severity

Auto Cleared

12200

Major

Yes

Alarm Parameters

Type

Parameter

Description

Location Information

Source

Specifies the cluster or system for which the alarm was generated.

ServiceName

Specifies the service for which the alarm was generated.

Additional Information

Details

Specifies that the username of password that is about to expire.

Impact on the System

The account cannot be used.

Possible Causes

The password is about to expire.

Handling Procedure

Change the user password.

  1. Log in to MRS Manager and choose O&M > Alarm > Alarms. In the alarm list, expand the alarm details, and view and record the name of the user whose password is about to expire in additional information.
  2. Change the password.
  3. If the DataArts Studio service is interconnected, check whether DataArts Studio jobs uses a password that is about to expire. If yes, go to the DataArts Studio management center to change the password. Otherwise, a large number of jobs may fail.
  4. Check whether the alarm is automatically cleared after 1:00 a.m. the next day.

    • If yes, no further action is required.
    • If no, go to 5.

Collect fault information.

  1. On MRS Manager, choose O&M. In the navigation pane on the left, choose Log > Download.
  2. Select Controller for Service and click OK.
  3. Click the edit icon in the upper right corner, and set Start Date and End Date for log collection to 10 minutes ahead of and after the alarm generation time, respectively. Then, click Download.
  4. Contact O&M personnel and provide the collected logs.

Alarm Clearance

This alarm is automatically cleared after the fault is rectified.

Related Information

None.