doc-exports/docs/dbss/umn/dbss_01_0252.html

Viewing the Alarms

This section describes how to view and confirm alarms of database audit.

Prerequisites

• You have applied for a database audit instance and the Status is Running.
• Database audit has been enabled.
• You have configured alarm notifications.

Procedure

1. Log in to the management console.
2. Click the name of an instance, click the Alarm Monitoring tab.
3. View the alarm information, as shown in Figure 1. For details about related parameters, see Table 1.
   Figure 1 Viewing the alarms
   

   Table 1 Parameters of alarms

   Parameter	Description
   Time	Time when an alarm occurred.
   Type	Alarm type. The options are as follows: Audit traffic exceeds threshold CPU exceptions Memory exceptions Disk exceptions Insufficient audit log storage Log backup to OBS failed Agent exceptions
   Alarm Risk Severity	Risk severity of an alarm. The options are as follows: High Moderate Low
   Cleared	Time when an alarm is cleared
   Confirmed Or Not	Confirmation status of an alarm. Click to filter alarms in Unconfirmed or Confirmed state.
   Description	Description of an alarm

   To query specified alarms, perform the following steps:

   • Select Last 30 minutes, 1 hour, 24 hours, 7 days, or 30 days from the drop-down list, and click to view alarms of the specified time range.
   • Select All, High, Moderate, or Low for Risk Severity. Alarms of specified severity are displayed in the list.
   • Select an alarm type, and alarms of specified alarm type is displayed in the list.

Follow-Up Procedure

You can select multiple alarms to be confirmed and click Batch Confirm to batch confirm alarms.